We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey aluminum horn speaker with mounting bracket, 11 inch diameter, rectangular prism shape

Pyle PHSP121T 30 W 11 in PA horn speaker 8 Ω 70 V transformer

SKU CH-0397-W2X8N

An 11-inch PA horn speaker delivering 30 watts with a 70 V transformer tappable at 30, 15 and 7.5 watts, 8 Ω impedance and 103 dB SPL

  • TypeDynamic Microphones
  • Accessory TypeMounting bracket and installation hardware
  • SpecificationMounting bracket and installation hardware, Pyle, 30 watts,
  • Sports Team1 Piece
  • Input Impedance8 ohm
  • Inputswired, Bluetooth
  • Delivers clear projection with 30 W output power
  • Covers vocal range using 400 Hz to 5 kHz response
  • Integrates into 70 V systems via multi-tap transformer
  • Mounts quickly with included bracket and hardware
  • Resists wear through aluminium housing construction

Compact horn speaker for public address

The Pyle PHSP121T is an 11 inch aluminium horn speaker rated at 30 watts with an 8 ohm impedance. It includes a 70 volt transformer with taps at 30, 15 and 7.5 watts for distributed audio systems. A mounting bracket and installation hardware are supplied for ceiling or wall placement.

Sustained output in distributed systems

The 70 volt transformer lets the speaker draw only the tapped power needed for each zone, reducing line loss on long cable runs. Frequency response spans 400 Hz to 5 kHz with a sensitivity of 103 dB, so voice announcements remain intelligible over extended periods without amplifier clipping.

Check amplifier and wiring before ordering

Verify your amplifier provides a 70 volt line output and can supply the total tapped wattage of all connected horns. Confirm the mounting surface can support the 5.43 lb weight and that the 13.1 inch depth fits the installation cavity. The unit is not water resistant, so choose a sheltered location for outdoor use.

Highlights

  • Delivers clear projection with 30 W output power
  • Covers vocal range using 400 Hz to 5 kHz response
  • Integrates into 70 V systems via multi-tap transformer
  • Mounts quickly with included bracket and hardware
  • Resists wear through aluminium housing construction

Specifications

BrandPyle
ModelPHSP121T
Part NumberPHSP121T
TypeDynamic Microphones
Accessory TypeMounting bracket and installation hardware
SpecificationMounting bracket and installation hardware, Pyle, 30 watts, 8 ohm, 1 KHz, Outdoor
Sports Team1 Piece
Input Impedance8 ohm
Inputswired, Bluetooth
OutputsStereo
Output Power30 watts
Driver UnitOutdoor
Power SupplyCorded Electric
Power Consumption30 watts
FeatureSpeakers
Dimension120×120×25mm 4.72*4.72*0.98in
Weight2463 grams
Package ContainsMounting bracket and installation hardware

Questions about this item

How much power does the 70 V transformer draw when the speaker runs all day?

The 70 V transformer is tappable at 30, 15 or 7.5 watts so continuous draw depends on the tap you select.

What amplifier output is required to drive the 8 Ω horn?

Any amplifier rated for 8 Ω loads and able to supply up to 30 W will drive the speaker.

Can the 11 in horn be used with an existing 70 V line that already has older paging horns?

Yes, the 70 V transformer taps at 30, 15 or 7.5 W so it connects in parallel with other 70 V horns on the same line.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.