PYLE AUDIO
PYLE AUDIO PDWR50B 5.25" 2-way home audio speaker pair 250 W RMS 500 W PMPO black
Two waterproof 5.25" two-way speakers with 250 W RMS power and IPX5 rating for indoor or outdoor mounting
- TypeIndoor/Outdoor Speakers
- Channels2-Way (Woofer and Tweeter)
- Sold AsPair (2 Speakers)
- Speakers Configuration2-Way Speaker System
- Driver UnitsWoofer: 5.25" Polypropylene Cone Tweeter: 1" Dome Tweeter
- Power Rating300W Peak Power
- Full-range sound from 30 Hz to 22 kHz
- IPX5 waterproof housing for marine and outdoor use
- 250 W RMS power handling per pair
- 90 dB sensitivity for efficient output
- Includes mounting brackets for wall or surface install
Indoor/Outdoor Pair
These Pyle PDWR50B speakers are a passive 2-way pair built for indoor and outdoor use. Each unit uses a 5.25" polypropylene woofer and a 1" dome tweeter inside a marine-grade polymer cabinet rated IPX5. They present a 4 ohm load and handle 250 W RMS or 500 W PMPO from an external amplifier.
Upgrade From Basic Drivers
The pair replaces single-cone or paper-cone drivers that lack weather protection and bass extension. The jump is worth it when you need 30 Hz low-end response and 90 dB sensitivity in damp environments like patios, garages or marine decks. They are not for buyers who want powered speakers with built-in amplification or wireless streaming.
Spring Terminals And Brackets
Installation uses supplied mounting brackets and spring-loaded wire terminals that accept bare cable ends. The compact 6.5" cube fits tight surfaces, but the 4.2 lb pair needs secure fastening to prevent vibration loosening. Passive design means you must run speaker cable back to a separate amp or receiver; no power cord is included.
Highlights
- Full-range sound from 30 Hz to 22 kHz
- IPX5 waterproof housing for marine and outdoor use
- 250 W RMS power handling per pair
- 90 dB sensitivity for efficient output
- Includes mounting brackets for wall or surface install
Specifications
| Brand | PYLE |
|---|---|
| Series | Marine Audio Series |
| Model | PDWR50B |
| Part Number | PDWR50B |
| Type | Indoor/Outdoor Speakers |
| Channels | 2-Way (Woofer and Tweeter) |
| Sold As | Pair (2 Speakers) |
| Speakers Configuration | 2-Way Speaker System |
| Driver Units | Woofer: 5.25" Polypropylene Cone Tweeter: 1" Dome Tweeter |
| Power Rating | 300W Peak Power |
| Frequency Response | 30 Hz |
| Nominal Impedance | 4 Ohms |
| Sensitivity | 90 dB |
| Connectors | Spring-loaded terminals (wired passive speakers) |
| Power Supply | Passive – requires connection to external amp or receiver |
| Color | Black |
| Cabinet | Marine-grade Polymer Housing |
| Features | IPX5 waterproof design Weather- and corrosion-resistant housing Mountable design for wall or surface Full-range 2-way sound system Ideal for marine, RV, patio, or garage installations |
| Dimensions & Weight | Dimensions: 6.5” x 6.5” x 4” Weight: 4.2 lbs per pair |
| Package Contents | (2) 5.25" Waterproof Speakers Mounting Brackets & Screws User Manual |
| Shipping weight | 0.45 kg |
| Package size | 25 × 25 × 25 mm |
Questions about this item
What mounting hardware is included for the 6.5" polymer cabinets?
The package supplies mounting brackets and screws that attach to the spring-loaded mounting system on each speaker for wall or surface installation.
How do I connect speaker wire to the spring-loaded terminals without stripping too much insulation?
Press each terminal lever, insert the bare wire end, then release the lever; the spring clamps hold the conductor securely without solder or ferrules.
When should I inspect the removable rustproof grilles and IPX5 seals on these marine speakers?
Check the grilles and seals annually or after heavy salt-spray exposure; clean with fresh water and replace any cracked gasket material to maintain waterproof rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



