We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cylindrical 6.5 inch car subwoofer with silver magnet and cone

PYLE AUDIO

Pyle Audio PDMW6 6.5" 250W car subwoofer

SKU CH-B93Q-7GXND MPN PDMW6

A 6.5-inch car subwoofer rated at 250 watts peak power for deep mid-bass response

  • Handles powerful bass with 250 W peak power
  • Compact 6.5 in size fits tight enclosures
  • Clear mid-bass response from 80 Hz upward
  • Versatile 4-8 ohm impedance matches many amplifiers
  • Ready to install with 6.5 in cut-out diameter

6.5" 250W Car Subwoofer

The Pyle Audio PDMW6 is a 6.5 inch mid-bass subwoofer rated at 250 watts peak power. It is designed for car audio enthusiasts who want to add low-frequency impact to a factory or aftermarket system without fitting a large enclosure.

Check Mounting Depth and Impedance

Verify that your door or rear-deck opening can accept a 6.5 inch cut-out and the stated mounting depth before ordering. Confirm that your amplifier or head unit can drive the speaker’s nominal impedance so the subwoofer receives adequate power without distortion.

Upgrade from Factory Door Speakers

This unit replaces standard 6.5 inch coaxials that lack dedicated bass reproduction, delivering higher peak output and deeper low-end response. The jump is worth it when you want noticeable mid-bass punch in a compact location and have an amplifier capable of supplying the rated power.

Highlights

  • Handles powerful bass with 250 W peak power
  • Compact 6.5 in size fits tight enclosures
  • Clear mid-bass response from 80 Hz upward
  • Versatile 4-8 ohm impedance matches many amplifiers
  • Ready to install with 6.5 in cut-out diameter

Specifications

No published specifications for this item yet.

Questions about this item

Does the PDMW6 6.5" subwoofer include an enclosure or wiring, or must they be purchased separately?

The PDMW6 is supplied as the raw 6.5" driver only; a suitable enclosure, amplifier and speaker cable must be sourced separately.

How do I decide between the 250 W peak rating and the 150 W max figure when matching an amplifier?

Use the 150 W maximum continuous power as the design target for amplifier RMS output; the 250 W peak represents short-term headroom only.

What does the 80 Hz low-end frequency response mean for bass performance in a vehicle?

An 80 Hz low-frequency limit means the driver reproduces mid-bass down to 80 Hz; deeper sub-bass requires a larger driver or ported enclosure tuned lower.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.