We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White square in-wall subwoofer 12.2 inches wide 4.2 inches deep

PYLE AUDIO

PYLE AUDIO PDIWS10 10in 2-way in-wall car subwoofer

SKU CH-W83F-H75WV

A 10-inch 2-way in-wall subwoofer rated at 180 W RMS and 360 W peak with an 8-ohm impedance and a 40 Hz to 3 kHz frequency response

  • TypeWoofer
  • Peak Power360W
  • RMS Power180W
  • Impedance8 Ohm
  • ColorWhite
  • 10-inch 2-way design handles 40 Hz to 3 kHz in-wall mounting
  • 180 W RMS power delivers consistent bass output
  • 360 W peak capacity manages dynamic transients
  • 8 Ohm impedance suits standard amplifier outputs
  • 2 in depth fits shallow wall cavities

10-inch in-wall car subwoofer

The Pyle Audio PDIWS10 is a 10-inch two-way subwoofer designed for in-wall or in-ceiling mounting in a vehicle. It delivers 180 W RMS and 360 W peak power at 8 ohms. The white enclosure measures 12.2 by 12.2 by 4.2 inches and weighs approximately 7.06 lb.

Upgrade from factory door speakers

This unit replaces thin factory speakers that cannot reproduce low frequencies. The jump is worth it when you want bass that reaches 40 Hz without adding a separate enclosure. The 180 W RMS rating handles sustained output for daily driving.

Buyers wanting concealed bass in a vehicle

The shallow 4.2-inch depth fits tight wall or ceiling cavities where a boxed subwoofer will not go. Installers who need a single 8-ohm driver for a custom crossover will appreciate the simple wiring. Buyers who want more storage space or a portable enclosure should look at something else.

Highlights

  • 10-inch 2-way design handles 40 Hz to 3 kHz in-wall mounting
  • 180 W RMS power delivers consistent bass output
  • 360 W peak capacity manages dynamic transients
  • 8 Ohm impedance suits standard amplifier outputs
  • 2 in depth fits shallow wall cavities

Specifications

BrandPYLE
TypeWoofer
Peak Power360W
RMS Power180W
Impedance8 Ohm
ColorWhite
Shipping weight2.87 kg
Package size381 × 381 × 381 mm

Questions about this item

What wall opening does the 12.2 by 12.2 inch frame with 4.2 inch depth need?

Cut a 12.2 by 12.2 inch square and ensure at least 4.2 inches of clear cavity depth behind the wall or ceiling.

How do I wire the 8 ohm terminals and what step gets missed?

Connect speaker cable to the spring terminals observing polarity; the step often missed is confirming the amplifier is rated for an 8 ohm load before powering up.

When should I check the foam surround on this 10 inch driver?

Inspect the foam surround annually for cracking or crumbling; replace it if the cone moves unevenly or distortion appears at 180 watts RMS.

More in Car Subwoofers

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.