PUTORSEN
PUTORSEN Triple Monitor Mount 49 inch centre arm 44 lbs 2 in 1 accessory
Holds a 49 inch centre screen and two 35 inch side monitors with gas-spring arms that tilt 35°, swivel 90° and rotate 360°
- Supports a 49 inch ultrawide centre screen up to 4.444 lbs
- Side arms hold 35 inch monitors up to 26.4 lbs each with VESA 75 and 100
- Tilt 35, swivel 90, rotate 360 for ergonomic positioning
- C-clamp fits desks 0.4 to 1.8 inch thick with included hardware
- Removable cable management hides wires for a clean workspace
Triple Monitor Mount for Ultrawide Centre Screen
This mount holds three screens with a dedicated centre arm built for a 49 inch ultrawide monitor weighing up to 4.444 lbs. The two side arms use gas springs for monitors up to 35 inches and 26.4 lbs each. It suits professionals who need a wide central display flanked by smaller panels.
VESA 75x75 and 100x100 Compatibility Required
The mount only fits monitors with 75x75mm or 100x100mm VESA patterns. Buyers must verify their screens match these patterns before purchase. It will not work with proprietary mounting holes or screens lacking VESA brackets.
C-Clamp Install on 0.4 to 1.8 Inch Desks
The included C-clamp secures to desks between 0.4 and 1.8 inches thick without drilling. All tools and hardware are supplied. Installation fails on desks outside this thickness range or on surfaces too fragile for clamp pressure. Cable channels keep wires hidden.
Highlights
- Supports a 49 inch ultrawide centre screen up to 4.444 lbs
- Side arms hold 35 inch monitors up to 26.4 lbs each with VESA 75 and 100
- Tilt 35, swivel 90, rotate 360 for ergonomic positioning
- C-clamp fits desks 0.4 to 1.8 inch thick with included hardware
- Removable cable management hides wires for a clean workspace
Specifications
No published specifications for this item yet.
Questions about this item
What does the 49 inch centre-arm limit mean when I mount an ultrawide?
The centre arm holds a single monitor up to 49 inches and 4.444 lbs; the two side arms each take a screen up to 35 inches and 26.4 lbs, so the total load can reach 44 lbs across all three VESA plates.
Which VESA patterns does the mount accept and what does that cap in practice?
Both 75x75 mm and 100x100 mm patterns are supported, limiting you to monitors that use one of those two hole spacings and fall within the per-arm weight limits above.
What desk thickness and mounting style does the C-clamp require?
The included C-clamp fits desks 0.4 to 1.8 inches thick without drilling; a grommet base is also supplied if you prefer to bolt through a pre-drilled hole.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
