PUTORSEN
PUTORSEN Triple Monitor Mount 49" Centre 32" Sides 44 lbs VESA 75/100
Mounts one 49" ultrawide centre screen plus two 32" side monitors on a 32" steel pole with 44 lb centre and 22 lb side capacity
- Holds 49" ultrawide centre plus two 32" side monitors
- Centre bracket supports 44 lbs, each side arm 22 lbs
- Height adjustable on 32" pole with tilt, swivel and 360° rotation
- Clamp fits desks .4–3.15" thick, grommet fits .4–1.57" thick
- Frees 40% more desk space versus standard monitor stands
Triple monitor layout
This mount holds one ultra-wide monitor up to 49 inches in the centre and two standard monitors up to 32 inches on the side arms. Every screen attaches via VESA 75×75 mm or 100×100 mm patterns. The centre bracket carries up to 44 lbs while each side arm supports 22 lbs.
Desk mounting and motion
A clamp base fits desks .4 to 3.15 inches thick and a grommet base fits desks .4 to 1.57 inches thick. The centre monitor tilts +50° to -20° and swivels ±25°. Side arms tilt ±45°, swivel 180° and rotate 360° for portrait or landscape use. Height adjusts smoothly along the 32 inch pole.
Capacity and limits
The 44 lb centre capacity and 22 lb per side capacity handle large, high-end monitors. Steel construction with reinforced joints prevents sagging. The mount reclaims roughly 40 percent more desk space than traditional stands. Monitors heavier than the stated limits or larger than the supported sizes cannot be used.
Highlights
- Holds 49" ultrawide centre plus two 32" side monitors
- Centre bracket supports 44 lbs, each side arm 22 lbs
- Height adjustable on 32" pole with tilt, swivel and 360° rotation
- Clamp fits desks .4–3.15" thick, grommet fits .4–1.57" thick
- Frees 40% more desk space versus standard monitor stands
Specifications
No published specifications for this item yet.
Questions about this item
Will the centre bracket sag under a 44 lb ultrawide after months of daily use?
The centre bracket is rated for 44 lbs and the reinforced steel joints are designed to prevent sagging under sustained load.
Does the clamp or grommet base loosen or transmit vibration when three monitors stay on all day?
The heavy-duty steel clamp fits desks .4 to 3.15 in thick and the grommet base fits .4 to 1.57 in, both built to stay rigid during continuous operation.
My monitors use 75 mm and 100 mm VESA patterns — do I need separate adapter plates?
Detachable VESA plates included with the mount support both 75x75 mm and 100x100 mm patterns, so no extra adapters are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



