We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

PULS Power

PULS ML30.241 DC Power Supply 100/240V AC 24/28V DC 30W 1.3A DIN Rail line protection

SKU CH-S2XN-X40CC

DIN-rail switching supply delivers 24–28 V DC at 1.3 A from 100–240 V AC input

  • Wide 100 to 240 V AC input suits global mains
  • 24 to 28 V DC adjustable output fits varied loads
  • 30 W at 1.3 A delivers reliable low-power supply
  • DIN-rail mount in 22.5 mm width saves panel space
  • Green LED status indicator shows operation at a glance

Compact DIN-rail power supply

The PULS ML30.241 is a single-phase switching supply that accepts 100 to 240 V AC or 110 V DC and delivers a regulated 24 to 28 V DC output at 30 W and 1.3 A. It mounts on a standard rail in a 75 mm by 22.5 mm by 91 mm plastic case rated IP20.

Suited for low-power control circuits

This unit fits panels that need a small, efficient 30 W source with a green LED status indicator and NEC Class 2 compliance. It is not for systems that require more than 30 W, higher current than 1.3 A, or an output voltage outside the 24 to 28 V DC range.

The 30 W power rating decides fit

At 30 W the supply covers modest loads such as sensors, relays or small PLCs while the 50 mV output noise and 31 ms hold-up time support stable operation from -10 °C to 70 °C.

Highlights

  • Wide 100 to 240 V AC input suits global mains
  • 24 to 28 V DC adjustable output fits varied loads
  • 30 W at 1.3 A delivers reliable low-power supply
  • DIN-rail mount in 22.5 mm width saves panel space
  • Green LED status indicator shows operation at a glance

Specifications

BrandPULS

Questions about this item

What is the maximum ambient temperature the MiniLine unit can run at continuously?

The supply is rated for an operating range of -10 to 70 degrees C, so sustained loads are supported up to 70 °C.

How much output ripple and audible noise does the 30 W model produce under full load?

Output noise is specified at 50 mV; the plastic IP20 enclosure has no fan, so acoustic noise is negligible.

Which input voltage and phase must the site provide for this DIN-rail supply?

It accepts 100 to 240 V AC single-phase at 50 to 60 Hz, plus 110 V DC if needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.