We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact plastic DIN-rail power supply, green LED, 22.5 mm wide

PULS Power

PULS ML15.241 DC Power Supply 100/240V AC 24/28V DC 15 W 0.6 A DIN Rail

SKU CH-WF05-6SPGQ

DIN-rail switching supply converts 100-240V AC or 110V DC to 24-28V DC at 15W with IP20 protection and -10°C to 70°C operation

  • TypePower Quality & Distribution
  • Wide input range 100 to 240V AC suits global mains
  • Compact DIN-rail footprint 22.5 mm wide saves panel space
  • High efficiency and long lifetime lower running costs
  • Green LED status indicator gives instant visual confirmation
  • NEC Class 2 compliant output meets safety requirements

Compact DIN-Rail DC Supply

The PULS ML15.241 is a switching DC power supply rated at 15 W with an output of 24 to 28V DC at 0.63 A. It accepts a wide input range of 100 to 240V AC or 110V DC at 50 to 60 Hz. The unit mounts on a DIN rail and fits a plastic case measuring 75 mm high, 22.5 mm wide and 91 mm deep.

Panel Builders and Machine Integrators

This supply suits control-panel builders who need a compact, NEC Class 2 compliant source for sensors, relays or small PLCs in a 22.5 mm wide footprint. Installations that require more than 15 W, higher current than 0.63 A, or an IP rating above IP20 should look at a larger unit.

15 W at 24 to 28V DC

The 15 W power rating combined with the adjustable 24 to 28V DC output is the single figure that decides whether this module can drive your load. If the connected devices draw more than 15 W total, or need a fixed voltage outside the 24 to 28V window, a different supply is required.

Highlights

  • Wide input range 100 to 240V AC suits global mains
  • Compact DIN-rail footprint 22.5 mm wide saves panel space
  • High efficiency and long lifetime lower running costs
  • Green LED status indicator gives instant visual confirmation
  • NEC Class 2 compliant output meets safety requirements

Specifications

BrandPULS
TypePower Quality & Distribution

Questions about this item

Will the 22.5 mm wide DIN-rail footprint fit beside my existing MiniLine units on the same rail?

Yes, the 22.5 mm width matches the MiniLine series spacing so it mounts directly alongside other MiniLine power supplies on a standard DIN rail.

How do I confirm the 24 to 28 V DC output is live and within spec after wiring?

The green LED status indicator lights when the output is present; measure 24 to 28 V DC at the output terminals with a multimeter to verify regulation.

Does the box include the DIN-rail clip or must I order it separately?

The DIN-rail mounting clip is built into the plastic case, so no separate clip is required; only the power supply itself is in the box.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.