PRUNkuar 2pcs-FAN002-6 6 Inch 80W 650CFM 2250RPM Industrial Cooling Fan Kit Black 2Pcs
Two slim six‑inch fans deliver 650 CFM at 2250 RPM with reversible blades and included brackets for tight engine bays
- High airflow cools engine bays efficiently with 650 CFM rating
- Slim profile fits tight engine compartments without clearance issues
- Reversible blade and wiring allow pusher or puller configuration
- Kit includes two fans, brackets and tie straps for complete installation
- Compatible with a wide range of classic V8 displacements from 265 to 502 cubic inches
Industrial Cooling Fan Kit
This kit contains two 6-inch electric cooling fans rated at 80 watts each, delivering up to 650 CFM at 2250 RPM. They are designed for automotive radiator, oil cooler, intercooler, and transmission cooling in hot rods and classic vehicles. The slim profile allows installation in tight engine bays where space is limited. Each unit includes mounting brackets and tie straps for secure fitment.
Push Pull Airflow Limitation
The fan blades and wiring can be reversed to switch between pusher and puller configurations, but a single unit cannot perform both roles simultaneously. Buyers needing simultaneous push-pull airflow across a single core must purchase additional kits. The 650 CFM rating represents maximum free-air flow; actual airflow drops when the fan operates against the static pressure of a dense radiator or condenser core.
650 CFM Maximum Airflow
The 650 CFM figure is the primary specification that determines whether this kit meets a specific cooling requirement. Builders calculating total engine-bay airflow should compare this number against their heat-rejection target before ordering. If the application demands higher static pressure or significantly greater volume, these fans will not satisfy the need.
Highlights
- High airflow cools engine bays efficiently with 650 CFM rating
- Slim profile fits tight engine compartments without clearance issues
- Reversible blade and wiring allow pusher or puller configuration
- Kit includes two fans, brackets and tie straps for complete installation
- Compatible with a wide range of classic V8 displacements from 265 to 502 cubic inches
Specifications
| Brand | PRUNkuar |
|---|---|
| Part Number | 2pcs-FAN002-6 |
Questions about this item
Should I buy the single fan or the 2-piece kit for my engine bay?
The kit includes two identical 6-inch fans so you can run a push-pull setup or cool separate components such as the radiator and oil cooler simultaneously.
What does the 650 CFM rating deliver when the fan is mounted on a radiator?
At 2250 RPM each fan moves up to 650 CFM, providing enough airflow to cool the entire engine bay including the radiator, A/C condenser, intercooler and transmission cooler.
How does the reversible blade and wiring feature affect installation options?
Reversing the blade and wiring changes the fan from a puller to a pusher, letting you mount it on either side of the radiator core without extra adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
