We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark green PLA filament spool in vacuum-sealed box

PrintOxe

PrintOxe Dark Green PLA Filament 1.75 mm 1 kg ±0.03 mm

SKU CH-TM8J-36CKW

1 kg spool of 1.75 mm dark-green PLA with ±.03 mm accuracy, vacuum-sealed with desiccant, prints at 180-210 °C

  • ColorDark Green
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Consistent layers from ±0.03 mm accuracy
  • Ready to print after vacuum-sealed dry storage
  • Broad printer fit with 180–210 °C range
  • Standard 1.75 mm diameter fits common extruders
  • Full 1 kg spool for extended projects

Filament specs and target users

This PrintOxe PLA filament comes in a dark green colour with a 1.75 mm diameter and ±0.03 mm dimensional accuracy. The 1 kg spool is vacuum sealed with desiccant to protect against moisture. It suits hobbyists and makers who need consistent extrusion on common desktop 3D printers.

Upgrade from lower grade filament

Switching from filament with looser tolerances or no moisture barrier reduces clog risk and improves layer adhesion. The jump is worth it when print failures trace back to diameter variation or absorbed humidity rather than slicer settings or hardware limits.

Installation notes and common issues

The spool dimensions are 7.80 inch diameter, 2.56 inch width and a 2.20 inch hub hole, fitting most standard holders. Recommended nozzle temperature is 180 °C to 210 °C. Common issues include slight colour variation from monitor images and the need to dry the spool if the seal is broken before use.

Highlights

  • Consistent layers from ±0.03 mm accuracy
  • Ready to print after vacuum-sealed dry storage
  • Broad printer fit with 180–210 °C range
  • Standard 1.75 mm diameter fits common extruders
  • Full 1 kg spool for extended projects

Specifications

BrandPrintOxe
ColorDark Green
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

Will the 7.80" spool diameter and 2.20" hub hole fit my printer's filament holder?

The spool measures 7.80 inches in diameter, 2.56 inches wide, with a 2.20 inch hub hole; verify your printer's holder accepts these dimensions before use.

What nozzle temperature should I set for the first layer to avoid under-extrusion?

Start between 180°C and 210°C; many users print the first layer at the higher end of this range to ensure good adhesion and flow.

How should I store the filament after opening the vacuum-sealed bag to prevent moisture absorption?

Return the spool to a sealed container with fresh desiccant after each use; PLA absorbs humidity quickly, which degrades print quality over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.