We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue PLA filament spool in vacuum-sealed box with desiccant

PrintOxe

PrintOxe Blue PLA Filament 1.75 mm 1 kg +/- .03 mm

SKU CH-VDZ1-VZ8GY

Blue PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.03 mm accuracy, vacuum-sealed with desiccant, prints at 180–210 °C

  • ColorBlue
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Consistent prints from tight +/- .03 mm diameter accuracy
  • Ready for most printers with standard 1.75 mm size
  • Moisture-free storage thanks to vacuum-sealed spool with desiccant
  • Wide temperature window of 180 °C to 210 °C for reliable extrusion
  • Full 1 kg net weight on a 7.80" spool for long runs

Filament diameter and tolerance

This blue PLA filament is supplied on a 1 kg spool with a 1.75 mm diameter and a dimensional accuracy of +/- .03 mm. The material is vacuum-sealed with desiccant to protect against moisture. It is intended for general-purpose 3D printing on fused-deposition printers.

Users who need consistent extrusion

Makers running printers that accept 1.75 mm PLA will find the tight tolerance helpful for reliable flow. The spool dimensions are 7.80 inch diameter, 2.56 inch width and a 2.20 inch hub hole. Buyers whose machines require a different filament diameter or a non-PLA material should look at other options.

Recommended nozzle temperature range

The manufacturer specifies an extrusion temperature window of 180 °C to 210 °C (356 °F to 410 °F). Staying within this range is the primary factor that determines whether the filament will print correctly on a given hotend.

Highlights

  • Consistent prints from tight +/- .03 mm diameter accuracy
  • Ready for most printers with standard 1.75 mm size
  • Moisture-free storage thanks to vacuum-sealed spool with desiccant
  • Wide temperature window of 180 °C to 210 °C for reliable extrusion
  • Full 1 kg net weight on a 7.80" spool for long runs

Specifications

BrandPrintOxe
ColorBlue
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

Should I pick the 1 kg spool or a different weight for my printer?

The listing supplies a single 1 kg spool measuring 2.20 lbs; no other spool weights are offered for this blue PLA.

What does the ±0.03 mm tolerance mean when the filament is feeding through my extruder?

The diameter stays within 1.75 mm ± 0.03 mm, so the filament cross-section remains consistent and reduces the risk of jams or uneven extrusion.

Will the 1.75 mm diameter work with a Bowden setup that specifies 1.75 mm filament?

Yes, the filament is manufactured to a 1.75 mm diameter with ±0.03 mm accuracy, matching the standard 1.75 mm specification used by Bowden and direct-drive printers alike.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.