Premier
Premier 72533 Paint Mixer 23 in 13/32 in shaft 4 in head 900 RPM
A 23 in paint mixing paddle with a 13/32 in shaft, 4 in spiral head and 900 RPM maximum speed
- ColorTransparent
- Spiral head blends paint thoroughly
- 4 in head diameter covers wide surface
- 13/32 in shaft fits standard drills
- 900 RPM maximum speed prevents splatter
- 23 in overall length reaches deep containers
Premier 72533 Paint Mixer Overview
The Premier 72533 is a spiral-head paint mixing paddle designed for use with power drills. It suits professional painters and DIY users who need to blend paint, coatings or other viscous fluids quickly. The 23 in overall length provides reach into standard buckets without excessive bending. New condition ensures the shaft and head are free of dried residue.
Mixing Constraints and Speed Limit
The paddle operates at a maximum of 900 RPM, which sets a firm ceiling for drill speed selection. Exceeding this limit risks damaging the spiral head or creating excessive splatter in thinner materials. The 13/32 in shaft diameter fits most 1/2 in drill chucks, but users must verify chuck compatibility before use. Transparent colour offers no UV protection for light-sensitive mixes.
Upgrade From Hand Stirring
This mixer replaces manual stirring sticks and basic propeller paddles that leave streaks in heavy-bodied paints. The spiral head generates a thorough vortex that incorporates settled pigment faster than flat blades. The jump is worth it when mixing multiple gallons per job or when consistent colour uniformity is critical. It does not suit high-viscosity adhesives or cementitious products requiring torque beyond a standard drill.
Highlights
- Spiral head blends paint thoroughly
- 4 in head diameter covers wide surface
- 13/32 in shaft fits standard drills
- 900 RPM maximum speed prevents splatter
- 23 in overall length reaches deep containers
Specifications
| Brand | PREMIER |
|---|---|
| Color | Transparent |
Questions about this item
Should I choose the 23 in shaft or a shorter version for my 5-gallon bucket?
The 23 in shaft reaches the bottom of standard 5-gallon buckets while keeping your hands above the rim, reducing splash and strain.
How does the 900 RPM limit affect mixing thick latex or epoxy?
Stay at or below 900 RPM on a variable-speed drill; slower speeds prevent air entrapment and give the spiral head time to fold heavy material evenly.
Will the 13/32 in shaft fit my 1/2 in drill chuck without an adapter?
Yes, a 13/32 in shaft is slightly under 1/2 in, so it clamps securely in any standard 1/2 in chuck with no adapter needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
