PRECISION
PRECISION BRAND 25265 Arbor Shim Steel 0.004 in PK10
Steel arbor shims, 0.004 in thick with 1.375 in ID and 1.875 in OD, pack of 10
- TypeShims and Shim Stock
- Precise fit with 1.375 in inside diameter and +.011/-.000 in tolerance
- Consistent spacing using 1.875 in outside diameter shims at .004 in thickness
- Reliable alignment backed by +/- .0005 in thickness tolerance across the pack
- Durable performance from full-hard AISI 1008-1010 steel rated at 80,000 psi tensile strength
- Ready-to-use convenience with ten plain-finish arbor shims in each package
Precision Brand Arbor Shim 0.004 in Steel
This pack contains ten steel arbor shims measuring 0.004 in thick with a 1.375 in inside diameter and 1.875 in outside diameter. They are made from AISI 1008-1010 steel with a full-hard temper and plain finish. The shims suit maintenance and assembly tasks requiring precise spacing on arbors or shafts.
Replaces worn or missing shims on arbors
Use these shims to restore correct spacing when original shims are lost, damaged or compressed during service. The jump is worth it when the application demands the 0.004 in thickness with a tolerance of +/- 0.0005 in and the inside diameter tolerance of +0.011/-0.000 in. They are not for applications needing a different thickness, diameter or material grade.
Handles fine axial spacing on 1.375 in arbors
The shims comfortably handle fine axial positioning where the 0.004 in thickness and tight outside diameter tolerance of +/- 0.002 in are required. They run out when the assembly calls for a thicker shim, a larger inside diameter or a different steel specification such as a graded alloy. The pack of ten provides multiple shims for stacking or replacement.
Highlights
- Precise fit with 1.375 in inside diameter and +.011/-.000 in tolerance
- Consistent spacing using 1.875 in outside diameter shims at .004 in thickness
- Reliable alignment backed by +/- .0005 in thickness tolerance across the pack
- Durable performance from full-hard AISI 1008-1010 steel rated at 80,000 psi tensile strength
- Ready-to-use convenience with ten plain-finish arbor shims in each package
Specifications
| Brand | PRECISION BRAND |
|---|---|
| Type | Shims and Shim Stock |
Questions about this item
What arbor diameter does the 1.375 in inside diameter fit?
The shim's 1.375 in inside diameter with +0.011/-0.000 in tolerance fits a 1.375 in arbor, allowing a slight clearance for sliding onto the shaft.
How do you install these 0.004 in thick shims without bending them?
Slide each shim onto the clean arbor, stack as needed for spacing, then tighten the retaining nut evenly to avoid kinking the 0.004 in full-hard steel.
Will the plain-finish AISI 1008-1010 steel rust and need replacement?
The plain finish offers no corrosion protection; in damp or outdoor use the shims can rust and should be inspected periodically and replaced if pitting appears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
