We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular outdoor PoE switch with two Ethernet ports

Powerdsine

Powerdsine PDS-102GO/AC/M outdoor PoE network switch 2-port 10/100/1000

SKU CH-1SX1-9C2PD MPN PDS-102GO/AC/M

Outdoor IP66 PoE switch powers two devices with 30W per port and extends reach to 200m

  • Outdoor-ready networking with IP66 and NEMA 4X protection
  • Powers two devices with up to 30W PoE per port
  • Extends device reach to 200 meters without extra hardware
  • Remote monitoring and reset simplify device management
  • 60W total power budget supports demanding outdoor equipment

Outdoor PoE switch for two powered devices

The PDS-102GO/AC/M is an outdoor-rated PoE switch built to connect two powered devices such as WLAN access points, IP cameras or P2P radios. It delivers up to 30 W per port with a 60 W total budget and accepts 110 V or 220 V AC input. The IP66 and NEMA 4X enclosure allows direct mounting in exposed locations without opening the unit during installation.

Practical limits of the 10/100/1000Base-T interface

Each RJ-45 port operates at 10, 100 or 1000 Mbps and the PoE extender function pushes the maximum link distance to 200 metres, double the standard 100 metres. Total output power is capped at 60 W, so two 30 W devices can run simultaneously but a third device cannot be added. The switch provides a single uplink port and two powered downlink ports only.

Check your existing setup before ordering

Verify that each powered device accepts 54 V DC PoE and complies with IEEE 802.3af or 802.3at. Confirm the mounting location can accommodate the external form factor measuring 2.8 by 5.9 by 8.4 inches and weighing 2.09 lb. Ensure your AC supply matches 110 V or 220 V and that the single uplink port satisfies your network topology.

Highlights

  • Outdoor-ready networking with IP66 and NEMA 4X protection
  • Powers two devices with up to 30W PoE per port
  • Extends device reach to 200 meters without extra hardware
  • Remote monitoring and reset simplify device management
  • 60W total power budget supports demanding outdoor equipment

Specifications

BrandPOWERDSINE INC.
Shipping weight1.32 kg
Package size25 × 25 × 25 mm

Questions about this item

Should I pick the 30 W per-port model or the 60 W total model?

This unit is a single model that delivers up to 30 W on each of its two ports, with a combined budget of 60 W, so both devices can draw the full 30 W simultaneously.

What does the 10/100/1000 rating mean for my outdoor cameras?

Each port negotiates at 10, 100 or 1000 Mbps, so cameras and access points will run at their native wired speed up to gigabit.

How does the IEEE 802.3at PoE+ standard limit my cable runs?

The switch extends the powered link to 200 metres, doubling the usual 100 metre Ethernet limit while still complying with the 802.3at specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.