PowerBass
PowerBass XL-1040TD 10" Dual 4-Ohm Shallow Subwoofer
A shallow-mount 10" dual 4-ohm subwoofer rated at 350 watts RMS and 700 watts max, using a single-piece injection-moulded flat cone and composite poly/glass-fibre basket
- Shallow 10" design fits tight enclosures easily
- 350 watts RMS delivers strong continuous bass output
- 700 watts max handles demanding musical peaks
- Single-piece flat cone improves piston motion control
- Composite poly/glass basket resists flex under load
Shallow-mount subwoofer for tight spaces
The PowerBass XL-1040TD is a 10-inch dual 4-ohm shallow-mount subwoofer rated at 350 watts RMS and 700 watts maximum. Its flat cone and slim profile suit enclosures where depth is limited, making it a practical choice for compact car audio builds or space-constrained home setups. The proprietary composite basket and injection-moulded cone are designed to maintain rigidity despite the reduced mounting depth.
Check enclosure depth and amplifier matching
Verify that your sealed or ported enclosure provides the internal volume and mounting depth recommended for a 10-inch shallow driver before ordering. Ensure your amplifier can deliver clean power into a dual 4-ohm load, wired for either 2-ohm or 8-ohm operation, and that the RMS rating aligns with the 350-watt continuous figure. Confirm the cut-out diameter matches the driver’s frame so the basket seats without interference.
Replaces deeper 10-inch drivers when space is
This unit upgrades from standard-depth 10-inch subwoofers that cannot fit behind tight panels or under seats, and from smaller 8-inch models that lack the same cone area. The jump is worth it when enclosure depth is the limiting factor and you need the output of a 10-inch cone without the usual mounting footprint. It is not suited for builds that can accommodate full-depth drivers where a conventional design would yield higher output for the same power.
Highlights
- Shallow 10" design fits tight enclosures easily
- 350 watts RMS delivers strong continuous bass output
- 700 watts max handles demanding musical peaks
- Single-piece flat cone improves piston motion control
- Composite poly/glass basket resists flex under load
Specifications
No published specifications for this item yet.
Questions about this item
Does the PowerBass XL-1040TD come with an enclosure or wiring, or do I need to buy them separately?
The subwoofer is supplied as the driver only; a suitable shallow-mount enclosure and speaker wire must be purchased separately.
Should I wire the dual 4-ohm coils for a 2-ohm or 8-ohm load to match my amplifier?
Wire the coils in parallel for a 2-ohm load or in series for an 8-ohm load, whichever matches your amplifier’s stable impedance rating.
What does the 350 W RMS rating mean for daily listening volume and amplifier matching?
It means the driver can handle 350 watts of continuous power, so choose an amplifier rated around 350 W RMS at the final impedance you wire the coils to.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
