POWER FIRST
POWER FIRST 100 ft 10 AWG 20 A 125 V L5-20R Yellow PVC SJTOW Extension Cord
A 100 ft, 10 AWG extension cord rated for 20 A at 125 V with a locking L5-20R connector, yellow PVC jacket and built-in power indicator
- TypeWire & Cable
- Delivers 2,500 watts for heavy-duty equipment
- 10 AWG conductors handle 20 amps continuously
- Operates from -58 to 194 degrees F
- Yellow PVC SJTOW jacket resists outdoor wear
- Lighted connector confirms power at a glance
Outdoor Power Reach
This 100-foot extension cord uses 10 AWG conductors rated for 20 amps at 125 volts. A single NEMA L5-20R receptacle and matching L5-20P plug provide a locking connection suited to job-site equipment and outdoor tools.
Sustained Load Capacity
The SJTOW jacket operates from -58 to 194 degrees Fahrenheit, so the cord remains flexible in cold weather and resists heat during continuous 2,500-watt draws. Three conductors and a round profile reduce voltage drop over the full length.
Locking Connector Build
Yellow PVC sheathing resists oil, water and abrasion while the twist-lock ends prevent accidental disconnection under vibration. One outlet limits the cord to a single high-draw device, so users needing multiple drops must add a separate distribution box.
Highlights
- Delivers 2,500 watts for heavy-duty equipment
- 10 AWG conductors handle 20 amps continuously
- Operates from -58 to 194 degrees F
- Yellow PVC SJTOW jacket resists outdoor wear
- Lighted connector confirms power at a glance
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Wire & Cable |
Questions about this item
Does the cord heat up or draw extra power when I run it at 20 A all day?
The cord is rated for 20 A at 125 V and a maximum of 2500 W, so it carries full load without exceeding its limits. The PVC jacket handles temperatures from -58 °F to 194 °F.
What must I already have to plug this cord into my supply?
You need a NEMA L5-20P receptacle on the power source. The cord ends in a single L5-20R connector, so it plugs straight into that locking outlet.
Will the 10 AWG conductors work with the older 12 AWG cable already in my garage circuit?
Yes. The cord uses three 10 AWG conductors rated for 20 A, which is a heavier gauge than 12 AWG and fully compatible on a 20 A circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



