POWER-FENG
POWER-FENG ME04XL laptop battery for HP Elite x2 1013 G3 7.7V 50.04Wh 6500mAh
Replacement lithium-ion battery delivers 7.7 V and 50.04 Wh for HP Elite x2 1013 G3 tablets
- Battery TypeLithium-Ion
- 04 Wh capacity supports extended work sessions
- 7 V lithium-ion chemistry matches original power delivery
- 6500 mAh rating provides reliable daily runtime
- Direct replacement for HP Elite x2 1013 G3
- Compatible with part numbers 937434-855, 937519-171, HSTNN-IB8D
Direct replacement for HP Elite x2 1013 G3
This lithium-ion battery replaces part numbers 937434-855, 937519-171 and HSTNN-IB8D. It fits the Elite x2 1013 G3 tablet across multiple regional SKUs. The pack delivers 7.7 V and 50.04 Wh in a black housing. Buyers needing a different voltage or form factor should look elsewhere.
Steady 7.7 V output across the discharge cycle
The cell chemistry maintains a consistent 7.7 V under sustained load rather than sagging after a short burst. Rated capacity is 50.04 Wh, equivalent to 6500 mAh at the nominal voltage. Runtime scales with the tablet's power draw; heavy workloads will deplete the pack faster than light use.
Simple swap with no soldering required
The battery connects via the original socket, so installation only needs a screwdriver and careful cable routing. Common issues are misaligned connectors or forgotten screw clips that prevent the back cover from seating. Verify the part number matches your unit before opening the chassis.
Highlights
- 04 Wh capacity supports extended work sessions
- 7 V lithium-ion chemistry matches original power delivery
- 6500 mAh rating provides reliable daily runtime
- Direct replacement for HP Elite x2 1013 G3
- Compatible with part numbers 937434-855, 937519-171, HSTNN-IB8D
Specifications
| Battery Type | Lithium-Ion |
|---|
Questions about this item
Does the 7.7 V 50.04 Wh lithium-ion cell run hot or drain quickly under all-day use?
The 7.7 V 50.04 Wh lithium-ion pack is built to match the original thermal profile of the Elite x2 1013 G3, so sustained daily operation stays within normal temperature and power-draw limits.
What must I already have to install the ME04XL battery in my Elite x2 1013 G3?
You need a compatible HP Elite x2 1013 G3 chassis and a small Phillips screwdriver to open the rear cover and swap the HSTNN-IB8D module.
Will this 6500 mAh replacement work alongside the original AC adapter and docking connector I still use?
Yes, the ME04XL uses the same 7.7 V interface as part numbers 937434-855 and 937519-171, so your existing charger and dock continue to function unchanged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



