Posi Lock
Posi Lock 11054T Transmission Jaw 17 3/8 in Reach 15 3/4 in
Transmission jaw with 17 3/8 in reach and 15 3/4 in maximum spread fits Posilock models 108, 110, 208, 210 and TJ-1
- TypeHand Tools
- Reaches 17 3/8 in overall length
- Maximum 15 3/4 in reach for deep access
- External jaw orientation grips securely
- Compatible with models 108, 110, 208, 210, TJ-1
- Fits Grainger parts 1AC03, 1AC05, 4GB28, 9YZ10
Transmission Jaw for External Pulling
The Posi Lock 11054T is a hand-operated transmission jaw built for external gripping tasks. Its 17 3/8 in overall length and 15 3/4 in maximum reach suit technicians working on larger components. The nonreversible jaw orientation fixes the pulling direction for consistent alignment. It targets professionals removing gears or bearings where external access is the only option.
Compatibility With Posilock Puller Models
This jaw fits Posilock manufacturer models 108, 110, 208, 210 and TJ-1 directly. Cross-referenced Grainger part numbers 1AC03, 1AC05, 4GB28 and 9YZ10 confirm interchangeability for existing tool inventories. Users with those specific puller frames can add this jaw without adapters. Buyers owning different puller brands or unlisted Posilock models cannot use this jaw.
Simple Jaw Swap on Compatible Frames
Installation requires threading the jaw onto a matching Posilock puller frame from the approved model list. The fixed external orientation eliminates alignment guesswork during setup. The primary failure point occurs when technicians force the jaw onto incompatible frames or attempt internal pulls the nonreversible design prevents. Verifying the puller model number against the compatibility list before starting avoids damage.
Highlights
- Reaches 17 3/8 in overall length
- Maximum 15 3/4 in reach for deep access
- External jaw orientation grips securely
- Compatible with models 108, 110, 208, 210, TJ-1
- Fits Grainger parts 1AC03, 1AC05, 4GB28, 9YZ10
Specifications
| Brand | POSI LOCK |
|---|---|
| Type | Hand Tools |
Questions about this item
Will the non-reversible jaw need replacement after repeated use?
The jaw is a fixed, non-reversible component; if the gripping surfaces wear, the entire transmission jaw must be replaced rather than flipped or serviced.
What reach limit appears first when pulling a transmission continuously?
The maximum reach is 15 3/4 in, so that physical extension stops any pull requiring a longer span before force or time becomes the limiting factor.
Does the 17 3/8 in tool generate noticeable heat during all-day use?
As a purely mechanical hand tool with no motor or hydraulic circuit, it produces no operational heat regardless of how long it is used.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
