Portable Wireless Soldering Kit 15W 1100mAh USB-C 180-450°C
Cordless 15 W soldering pen heats to 450 °C in 8 seconds and runs 20–50 minutes per USB-C charge
- Watts15 watts
- Rapid 8-second heat-up to 450 °C for quick starts
- Adjustable 180–450 °C range suits boards and jewellery
- Cordless freedom with 1100 mAh battery, 20–50 min run-time
- USB-C charging allows use while plugged in for longer jobs
- Replaceable tips and auto power-off add convenience and safety
Portable 15W Soldering Pen
A cordless soldering iron with a built-in 1100mAh battery and USB-C charging delivers 15 watts of power for circuit-board work, jewellery repair and small DIY tasks. An LED display shows the current temperature and the tip heats to working level in around eight seconds. The kit includes a replaceable tip and auto power-off for safety.
Adjustable 180–450°C Range
Temperature is set between 180°C and 450°C (356°F–842°F) using the + and – buttons; above 350°C each press raises the setting by 5°C. Correct tip insertion is confirmed when only the letter B remains visible, ensuring accurate thermal transfer.
Suited for Light Repairs and Hobby Use
Ideal for technicians and hobbyists who need a portable iron for occasional board-level soldering, wire tinning or jewellery work. Not intended for extended sessions or large joints; continuous run time is 20–50 minutes per charge depending on temperature, though the tool can be used while connected to a 5V/2A adapter.
Highlights
- Rapid 8-second heat-up to 450 °C for quick starts
- Adjustable 180–450 °C range suits boards and jewellery
- Cordless freedom with 1100 mAh battery, 20–50 min run-time
- USB-C charging allows use while plugged in for longer jobs
- Replaceable tips and auto power-off add convenience and safety
Specifications
| Watts | 15 watts |
|---|
Questions about this item
What does the 15 W rating mean when I am actually using the iron?
It supplies enough power to reach working temperature in about 8 seconds and maintain heat for light circuit-board or jewellery joints, but it is not intended for large or heavy-duty soldering tasks.
How does the USB-C charging port limit real-world use?
The port accepts a 5 V / 2 A adapter so you can keep working while charging; a full charge of the 1100 mAh battery gives roughly 20 to 50 minutes of cordless operation depending on the temperature you set.
What do I need to check so the tip fits and mounts correctly?
Insert the tip until only the letter B is visible on the shaft; if it is not seated that deep the temperature reading and heat transfer will be significantly affected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
