Polyken
Polyken 510 Gaffers Tape 11.5 mil 48mm x 50m Gray hvac control
Gray vinyl-coated cloth gaffer's tape, 11.5 mil thick, 48 mm by 50 m, residue-free rubber adhesive rated 40 to 200 °F
- ColorGray
- Matte-finish vinyl cloth reduces glare on set
- Rubber adhesive removes cleanly without residue
- 5 mil thickness handles heavy-duty bundling
- 48 mm by 50 m roll covers large jobs
- Performs from 40 to 200 degrees Fahrenheit
HVAC control tape for assembly and repair
Polyken 510 is a residue-free gaffer's tape built on vinyl-coated cloth with a rubber adhesive. The 11.5 mil thickness provides a matte-finish surface that tears cleanly by hand. It is supplied as a continuous roll for indoor and outdoor tasks across assembly, manufacturing, construction and general maintenance. Gray colour matches typical ductwork and equipment finishes.
Rubber adhesive limits at temperature extremes
Adhesion to steel is rated at 50 oz/in across a working range of 40 to 200 degrees F. Below the minimum the bond can lose grab on cold metal; above the maximum the adhesive may soften and leave residue on removal. The vinyl-coated cloth backing resists moisture and abrasion, but prolonged UV exposure outdoors will degrade the matte finish faster than indoor use. Plan removal within the rated window for clean release.
Replaces cloth duct tapes that leave adhesive behind
Traditional cloth duct tapes often leave a sticky residue when pulled from sheet metal, flex duct or painted surfaces after heat cycles. Polyken 510 upgrades to a rubber system designed for residue-free removal within its temperature rating. The jump is worth it when rework or inspection demands clean surfaces, such as sealing HVAC seams that must be opened later or masking metalwork during fabrication.
Highlights
- Matte-finish vinyl cloth reduces glare on set
- Rubber adhesive removes cleanly without residue
- 5 mil thickness handles heavy-duty bundling
- 48 mm by 50 m roll covers large jobs
- Performs from 40 to 200 degrees Fahrenheit
Specifications
| Brand | POLYKEN |
|---|---|
| Color | Gray |
Questions about this item
Is the 48 mm width the right choice for sealing standard HVAC duct joints?
The roll is 48 mm (about 1 7/8 in) wide and 50 m (54 yd) long, a common size for duct sealing and general repairs.
What does the 11.5 mil thickness mean for durability on a job site?
At 11.5 mil the vinyl-coated cloth backing resists tearing and conforms to irregular surfaces while staying residue-free on removal.
How does the rubber adhesive perform across the 40 °F to 200 °F service range?
The rubber adhesive delivers 50 oz/in adhesion to steel from 40 °F up to 200 °F, holding in cold starts and high-heat duct runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
