Polaris Vision Tap
Polaris Vision Tap IT-250CB Multitap Connector 2 Port Aluminum Clear Hex
Two-port aluminum multitap connector accepts 6 AWG to 250 kcmil stranded copper or aluminum conductors, rated 600 V and 194 °F with plastisol insulation and 5/16 in hex drive
- Handles up to 250 kcmil stranded copper for high-capacity connections
- Dual-port design connects two conductors in one compact block
- Plastisol insulation rated to 194 °F protects against heat
- cULus listed to UL 486A and UL 486B for code compliance
- RoHS compliant and UL 94 assessed for safety and environmental standards
2-Port Aluminum Multitap Connector
The Polaris IT-250CB is a dual-port multitap connector built for electrical professionals joining aluminum or copper conductors. Its clear plastisol insulation provides visual confirmation of wire insertion while meeting cULus, UL 486A and UL 486B standards.
6 AWG to 250 kcmil Wire Range
This connector accepts stranded copper wire from 6 AWG up to 250 kcmil, giving ample headroom for heavy-gauge feeders and service entrances. The 600 V rating and 194 °F maximum operating temperature cover standard residential and commercial power circuits, while the single 5/16 in hex drive simplifies installation torque.
Clear Plastisol Insulated Body
The aluminum body is coated in clear plastisol, eliminating the need for separate taping or heat-shrink in many indoor and protected outdoor locations. Two ports allow straight-through or branch splices without additional hardware, and RoHS compliance supports projects with material-restriction requirements.
Highlights
- Handles up to 250 kcmil stranded copper for high-capacity connections
- Dual-port design connects two conductors in one compact block
- Plastisol insulation rated to 194 °F protects against heat
- cULus listed to UL 486A and UL 486B for code compliance
- RoHS compliant and UL 94 assessed for safety and environmental standards
Specifications
| Brand | POLARIS |
|---|
Questions about this item
Will the Polaris Vision Tap IT-250CB accept the 6 AWG stranded copper wires I already have installed?
Yes, the connector is rated for stranded copper wire sizes from 6 AWG minimum up to 250 kcmil maximum.
How can I verify the connection is secure after tightening the hex screw?
Use a 5/16 inch hex driver to torque the set screw until the conductor is firmly clamped; the clear plastisol insulation lets you visually confirm full wire insertion.
Does the package include the 5/16 inch hex driver or must I supply my own?
The connector ships as a two-port aluminum body with plastisol finish; a 5/16 inch hex driver is not included and must be provided separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
