We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

PLANET

PLANET WGSW-24040 20-Port 10/100/1000T + 4-Port SFP Combo Managed network switch

SKU CH-08XX-JMCN2 MPN WGSW-24040

Managed Gigabit switch with 24 RJ-45 ports, four shared SFP slots and IPv6-ready Layer 2 features

  • FormatRackmount
  • StandardsIEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 8
  • Network Management TypeManaged
  • Primary Ports24 10/100/1000Base-T RJ-45 Auto-MDI / MDI-X ports, 4 1000Bas
  • Primary Port SpeedUp to 32Gbps bandwidth(Duplex Mode)
  • MAC Address Table16K entries, automatic source address learning and ageing
  • Managed Layer 2 switching with 24 Gigabit RJ-45 ports
  • Four shared SFP combo slots for fibre uplinks
  • 32 Gbps switching bandwidth handles heavy traffic
  • 16K MAC address table with auto learning and ageing
  • IPv4 and IPv6 management ready for modern networks

Switch purpose

The PLANET WGSW-24040 is a rack-mount Layer 2+ managed Gigabit switch with 20 dedicated RJ-45 ports plus four combo SFP slots shared with ports 21 to 24. It targets SMB networks and ISP edge deployments that require both IPv4 and IPv6 management in a single 1U appliance.

Interface limits

The 24 copper ports auto-negotiate at 10, 100 or 1000 Mbps using IEEE 802.3ab, while the four SFP interfaces accept 1000Base-SX, LX or BX modules under IEEE 802.3z. Total switching fabric reaches 32 Gbps in duplex mode, and jumbo frames up to 9000 bytes are supported across all ports.

Capacity and headroom

A 16K-entry MAC address table with automatic learning and ageing handles moderate campus or branch topologies, while 4 Mbits of buffer memory absorbs burst traffic on the store-and-forward engine. Four priority queues per port with strict or WRR scheduling and per-port rate limiting provide QoS headroom for voice and video, but the shared SFP design means fibre uplinks reduce available copper density.

Highlights

  • Managed Layer 2 switching with 24 Gigabit RJ-45 ports
  • Four shared SFP combo slots for fibre uplinks
  • 32 Gbps switching bandwidth handles heavy traffic
  • 16K MAC address table with auto learning and ageing
  • IPv4 and IPv6 management ready for modern networks

Specifications

BrandPLANET
ModelWGSW-24040
FormatRackmount
StandardsIEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid spanning tree protocol IEEE 802.1s Multiple spanning tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 FRC 3810
Network Management TypeManaged
Primary Ports24 10/100/1000Base-T RJ-45 Auto-MDI / MDI-X ports, 4 1000Base-SX/LX/BX SFP interfaces, shared with Port 21 to Port 24
Primary Port SpeedUp to 32Gbps bandwidth(Duplex Mode)
MAC Address Table16K entries, automatic source address learning and ageing
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames9000 bytes
Buffer Memory4Mbits
ProtocolsCSMA/CD
Security• IEEE 802.1x Port-Based / MAC-Based network access authentication • IP-Based Access Control List (ACL) • MAC-Based Access Control List • Static MAC
SNMPYes
QoS• 4 priority queues on all switch ports. • Supports for strict priority and weighted round robin (WRR) CoS policies • Ingress Shaper and Egress Rate Limit per port bandwidth control • Traffic-policing policies on the switch port
Power100~240VAC, 50/60Hz
Shipping weight6.80 kg
Package size559 × 356 × 102 mm

Questions about this item

Should I use the 24 RJ-45 ports or the 4 shared SFP slots for my uplink connections?

Ports 21 to 24 share bandwidth with the SFP slots; choose copper for short runs or SFP fibre modules for longer links, but you cannot use both on the same port number simultaneously.

What does the 32 Gbps bandwidth figure mean for daily traffic?

It is the total switching fabric capacity in full-duplex mode, so the switch can forward wire-speed traffic across all 24 Gigabit ports without internal blocking.

Which IEEE standards limit the speed on the RJ-45 and SFP interfaces?

The RJ-45 ports follow 802.3ab for 1000Base-T and the SFP slots follow 802.3z for 1000Base-SX/LX/BX, both capping at 1 Gbps per port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.