We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wall-mount metal network switch with eight RJ45 ports and two SFP slots

PLANET

PLANET WGS-4215-8T2S 8-port 10/100/1000T + 2-port 100/1000X SFP wall-mount managed network switch

SKU CH-3282-7T7SY MPN WGS-4215-8T2S

Wall-mountable managed switch with eight gigabit RJ45 ports and two SFP slots, operating from -40 to 75 °C in an IP30 metal housing

  • FormatWall Mountable
  • StandardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 8
  • Network Management TypeManaged
  • Primary Ports8 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table8K
  • Wall-mount design fits tight enclosures and electric boxes
  • Managed Layer 2 switching with SNMP and 802.1X security
  • 8 copper ports plus 2 SFP uplinks for flexible links
  • Operates from -40 to 75 °C in IP30 metal housing
  • 1 MB buffer and 9216-byte jumbo frames handle bursts

Industrial wall-mount managed switch

The PLANET WGS-4215-8T2S is a managed Layer 2 switch built for industrial and commercial networks. It provides eight RJ45 ports at 10/100/1000 Mbps and two SFP slots for 100/1000 Mbps fibre uplinks. The unit operates from -40 to 75 degrees C inside an IP30 metal housing. It is suited for automation, surveillance and wireless LAN deployments where rugged, fanless hardware is required.

Upgrade from unmanaged or desktop switches

This switch replaces unmanaged or consumer-grade hardware when VLAN segmentation, link aggregation or remote monitoring become necessary. It supports up to 256 VLAN groups with 802.1Q tagging, Q-in-Q tunnelling and private VLANs. LACP trunking, STP/RSTP/MSTP and SNMP management add resilience and visibility. The jump is worth it when deterministic traffic handling and security policies such as 802.1X or DHCP snooping are required.

Fits space-constrained enclosures

The compact wall-mount format fits electrical weak boxes and narrow cabinets with front-access cabling and LED monitoring. Dual-speed SFP ports free copper uplinks for fibre runs beyond 100 metres. An 8K MAC table and 4.1 MB buffer absorb burst traffic from cameras or IoT devices. QoS maps eight priority queues with strict or weighted round-robin scheduling. Builders needing rack-mount brackets or PoE power budgets should look elsewhere.

Highlights

  • Wall-mount design fits tight enclosures and electric boxes
  • Managed Layer 2 switching with SNMP and 802.1X security
  • 8 copper ports plus 2 SFP uplinks for flexible links
  • Operates from -40 to 75 °C in IP30 metal housing
  • 1 MB buffer and 9216-byte jumbo frames handle bursts

Specifications

BrandPLANET
ModelWGS-4215-8T2S
FormatWall Mountable
StandardsIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
Network Management TypeManaged
Primary Ports8 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table8K
Switching MethodStore and Forward
VLAN Support802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Jumbo Frames9216 bytes
Buffer Memory4.1MB
ProtocolsSpanning Tree Protocol:
STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
SecurityIEEE 802.1X port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support: Broadcast/Unknown unicast/Unknown multicast
SNMPYes
QoS8 mapping IDs to 8 level priority queues:
Port Number
802.1p priority
DSCP/IP precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control
LACPYes
Layer2
Port MirroringTX/RX/Both
Many-to-1 monitor
LEDsSystem: Power (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 8): 1000 LNK / ACT (Green), 10/100 LNK/ACT (Orange)
100/1000Mbps SFP Interfaces (Port 9 to Port 10): 1000 LNK / ACT (Green), 100 LNK/ACT (Orange)
ButtonReset Button:
< 5 sec: System reboot
> 5 sec: Factory default
Power12V - 48V DC, 1A / 24V AC, 1A terminal block
12V - 48V, 1A DC jack power input
Max. 7.9 watts / 26BTU
FeaturesPhysical Port:
8-Port 10/100/1000BASE-T Gigabit RJ45 copper
2 100/1000BASE-X mini-GBIC/SFP slots
Industrial Case and Installation:
Compact size, wall-mounted, magnetic wall mount and DIN-rail design
IP30 metal case protection
Supports -40 to 75 degrees C operating temperature
Supports EFT protection of 6KV DC for power line
Supports ESD 6KV DC Ethernet protection
Redundant power design
12V - 48V DC / 24V AC terminal block / 12V - 48V DC jack power input
12V - 48V DC input range for booting with polarity reverse protect function
Switching:
Hardware based 10/100Mbps, half/full duplex a
Dimensions5.28" z 7.01" x 0.98"
Weight1.41 lbs.
Temperature-40 - 75 degree Celsius
Humidity5% - 95%, Non-condensing
Shipping weight1.36 kg
Package size255 × 211 × 102 mm

Questions about this item

What wall space and clearance does the WGS-4215-8T2S need for mounting?

The switch uses a compact flat metal housing with front-access ports and LEDs, designed to fit inside a wall enclosure or electric weak box; allow enough depth for RJ45 and SFP cables to bend without stress.

What is the correct order for powering up and linking the SFP ports on this switch?

Insert compatible 100/1000X SFP transceivers into ports 9 and 10 before applying power, then connect fibre cables; the green LED shows 1000 Mbps link and the orange LED shows 100 Mbps link.

Which components of the WGS-4215-8T2S may need replacement during its service life?

The SFP transceivers in ports 9 and 10 are hot-swappable modules that can be replaced independently if a link fails or a different fibre distance is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.