We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal network switch with four RJ45 ports and two SFP slots, DIN rail and wall mountable

PLANET

PLANET IGS-620TF 4-Port 10/100/1000T + 2-Port 100/1000X SFP network switch

SKU CH-1RPK-RRR75 MPN IGS-620TF

An unmanaged industrial switch with four gigabit RJ45 ports and two SFP slots for fiber uplinks, operating from minus 40 to 75 degrees Celsius

  • FormatDIN Rail Kit and Wall Mount Ear
  • StandardsIEEE 802.3 Ethernet / 10Base-T IEEE 802.3u Fast Ethernet / 1
  • Network Management TypeUnmanaged
  • Primary Ports4 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table1K
  • Operates in extreme cold to 75 °C for harsh industrial sites
  • Redundant DC 12‑48 V input with reverse-polarity protection keeps network running
  • 12 Gbps switching fabric handles full wire-speed traffic on all six ports
  • 9216‑byte jumbo frames boost throughput for large data transfers
  • Slim IP30 metal case mounts on DIN rail or wall for space-saving install

Industrial Gigabit Switch

The PLANET IGS-620TF is an unmanaged industrial Ethernet switch with four RJ45 copper ports and two SFP fibre slots. It operates across a wide DC 12 to 48 volt or AC 24 volt input range with redundant power and polarity reverse protection. The slim IP30 metal enclosure is rated for -40 to 75 degrees Celsius.

DIN Rail or Wall Mount

The unit ships with a DIN rail kit and wall-mount ears for quick installation in cabinets or on panels. Auto MDI/MDI-X on every copper port removes the need for crossover cables. SFP speed is set by a DIP switch for 100Base-FX or 1000Base-X transceivers; using the wrong module or switch position will break the link.

Hardened Networks Without Management

This switch suits factories, transport cabinets or outdoor enclosures that need simple gigabit connectivity with fibre uplinks and wide-temperature reliability. It is not for buyers who need VLANs, SNMP, PoE power output or redundant ring protocols, because the hardware is strictly unmanaged.

Highlights

  • Operates in extreme cold to 75 °C for harsh industrial sites
  • Redundant DC 12‑48 V input with reverse-polarity protection keeps network running
  • 12 Gbps switching fabric handles full wire-speed traffic on all six ports
  • 9216‑byte jumbo frames boost throughput for large data transfers
  • Slim IP30 metal case mounts on DIN rail or wall for space-saving install

Specifications

BrandPLANET
ModelIGS-620TF
FormatDIN Rail Kit and Wall Mount Ear
StandardsIEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX
IEEE 802.3x Full-Duplex Flow Control
Network Management TypeUnmanaged
Primary Ports4 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table1K
Switching MethodStore and Forward
Jumbo Frames9216 bytes
LEDs3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Green: Power Fault
2 x LED for Per Copper Port (Port-1~Port-4):
Green: 1000 LNK/ACT
Orange:100 LNK/ACT
1 x LED for Per mini-GBIC interface (Port-5 and Port-6):
Green: LNK/ACT
PowerDC 12 - 48V or AC 24V
Redundant power with polarity reverses protection function
7.2watts / 24BTU
FeaturesPhysical Port:
4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
Fiber Port Redundancy:
Link status auto-detect and redundant on Dual ports with the same connector type
Only Primary-Port is active at a time, the Backup-Port is blocked
When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically.
Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port.
Layer 2 Features:
Supports Auto-negotiation
Dimensions1.26" x 5.31" x 3.43"
Weight1.11 lbs.
Temperature-40 - 75 degree Celsius
Humidity5% - 95%, Non-condensing
Shipping weight0.50 kg
Package size136 × 88 × 32 mm

Questions about this item

How can I confirm the IGS-620TF is operating correctly using its front-panel LEDs?

Check the three system LEDs: green for DC Power 1, green for DC Power 2, and green for Power Fault. Each copper port shows green for 1000 LNK/ACT or orange for 100 LNK/ACT. Each SFP port shows green for LNK/ACT.

What is included with the IGS-620TF and what must I purchase separately?

The switch ships with a DIN rail kit and wall-mount ears. SFP transceivers for the two SFP slots are not included and must be bought separately to use the fibre ports.

Which SFP transceiver type should I select for the IGS-620TF's SFP slots?

The SFP slots support both 1000Base-X and 100Base-FX transceivers. Use the DIP switch on the switch to configure each slot for the transceiver speed you install.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.