We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

PLANET

PLANET IGS-5225-8P2T2S 8-port PoE+ 2-port RJ45 2-port SFP managed network switch

SKU CH-1CJE-AQQ0M MPN IGS-5225-8P2T2S

Industrial managed switch with eight PoE+ Gigabit RJ45 ports, two extra Gigabit RJ45 ports and two SFP slots for fibre uplinks

  • StandardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX / 100BASE-FX IEEE
  • Network Management TypeManaged
  • Primary Ports8 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE
  • MAC Address Table8K
  • Switching MethodStore and Forward
  • VLAN SupportYes
  • Powers eight devices through PoE+ injector ports
  • Managed Layer 2+ features include VLAN, QoS, LACP
  • Dual DC power inputs support 48 to 56 volt operation
  • SFP slots accept 100 or 1000 megabit modules
  • Industrial temperature rating from minus 40 to 75 Celsius

Industrial PoE+ managed switch

The PLANET IGS-5225-8P2T2S is a Layer 2+ managed Ethernet switch built for industrial networks. It provides eight Gigabit RJ45 ports with IEEE 802.3at PoE+ injection plus two additional Gigabit RJ45 ports and two 100/1000BASE-X SFP slots for fibre uplinks. The unit operates from dual 48–56 V DC inputs and is rated for -40 to 75 °C environments.

DIN-rail mounting and console access

The switch mounts on a standard DIN rail and measures 5.98 x 2.83 x 4.21 inches, weighing 2.18 lbs. An RJ45 console port gives direct CLI access for initial configuration before the network is live. Common issues include forgetting that PoE+ output requires the DC source to exceed 51 V, and neglecting to enable the ERPS ring or Spanning Tree settings that prevent loops in redundant topologies.

Power budget and SFP compatibility check

Verify that your DC supply can deliver the 252.3 W maximum draw when all eight PoE+ ports are fully loaded. Confirm that any SFP transceivers you plan to use are 100/1000BASE-X compatible and support the required distance, as the slots auto-detect the module type. Ensure the cabinet or enclosure provides adequate airflow for the wide operating temperature range.

Highlights

  • Powers eight devices through PoE+ injector ports
  • Managed Layer 2+ features include VLAN, QoS, LACP
  • Dual DC power inputs support 48 to 56 volt operation
  • SFP slots accept 100 or 1000 megabit modules
  • Industrial temperature rating from minus 40 to 75 Celsius

Specifications

BrandPLANET
ModelIGS-5225-8P2T2S
StandardsIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX / 100BASE-FX
IEEE 802.3z Gigabit SX / LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 1588 PTPv2
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 7
Network Management TypeManaged
Primary Ports8 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
2 x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
One RJ45 console interface for basic management and setup
MAC Address Table8K
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames9KB
PoEYes
SNMPYes
QoSYes
LACPYes
Port MirroringYes
LEDsSystem:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Ring (Green)
Ring Owner (Green)
DIDO (Red)
Per 10/100/1000T RJ45 PoE+ Ports:
PoE-in-Use (Orange)
LNK / ACT (Green)
Per SFP Interface:
100 LNK / ACT (Orange)
1000 LNK / ACT (Green)
PowerPower Requirements: Dual 48~56V DC (>51V DC for PoE+ output recommended)
Power Consumption:
Max. 7.3 watts / 25.04 BTU (Power on without any connection)
Max. 252.3 watts / 865.64 BTU (Full loading with PoE function)
FeaturesPhysical Port:
8 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
2 x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
One RJ45 console interface for basic management and setup
Power over Ethernet:
Complies with IEEE 802.3at Power over Ethernet Plus / end-span PSE
Up to 8 IEEE 802.3af / 802.3at devices powered
Supports PoE power up to 36 watts for each PoE port
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
PoE m
Dimensions5.98" x 2.83" x 4.21"
Weight2.18 lbs.
TemperatureOperating Temperature: -40 ~ 75 degree Celsius
Storage Temperature: -40 ~ 85 degree Celsius
Humidity5% - 95%, Non-condensing
Shipping weight1.36 kg
Package size254 × 178 × 127 mm

Questions about this item

How can I confirm the IGS-5225-8P2T2S is operating correctly after installation?

Check the front-panel LEDs: green Power 1 and Power 2 show dual supply is active, the orange PoE-in-Use LEDs on the eight PoE+ ports confirm powered devices are drawing current, and green LNK/ACT on every RJ45 and SFP slot verifies live links.

What ships with the switch and what must I source separately?

The unit includes the managed switch chassis, console cable for CLI access and mounting hardware; SFP transceivers for the two 100/1000X slots and a 48–56 V DC power supply (above 51 V for PoE+ budget) are not included.

Which SFP module speed should I choose for the two mini-GBIC slots?

The slots auto-detect 100 Mbps or 1 Gbps SFP modules; select 100BASE-FX optics for legacy fibre runs or 1000BASE-SX/LX for gigabit uplinks depending on the distance and fibre type you are deploying.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.