SonicWall
SonicWall 01-SSC-1445 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$378.99
0.00454463BTC
In stock
PLANET
PLANET IGS-5225-4UP1T2S Industrial L2+ 4-Port Ultra PoE + 1-Port RJ45 + 2-Port SFP Managed Switch
Industrial L2+ managed switch with four Ultra PoE RJ45 ports, one standard RJ45 port and two SFP slots for gigabit fibre uplinks
- FormatDIN Rail Kit and Wall-mount Kit
- StandardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 8
- Network Management TypeManaged
- Primary Ports5 x RJ45 + 2 SFP
- Primary Port Speed10/100/1000Mbps
- MAC Address Table8K
- Ultra PoE supplies up to 15.4W per port for connected devices
- Industrial DIN-rail and wall-mount format suits harsh environments
- Layer 3 static routing handles IPv4 and IPv6 traffic
- 8K MAC table and 4MB buffer maintain wire-speed forwarding
- Comprehensive security with 802.1X, RADIUS and TACACS+ authentication
Industrial L2+ Managed Switch
The PLANET IGS-5225-4UP1T2S is a managed industrial switch with four Ultra PoE RJ45 ports, one standard RJ45 port and two SFP uplinks. It supports Layer 3 static routing for IPv4 and IPv6, 8K MAC entries and a 4 MB packet buffer. The unit mounts on DIN rail or wall brackets.
Suited for hardened networks needing high PoE
Installers powering PTZ cameras, wireless APs or VoIP handsets over a single cable benefit from the 255 VLAN groups, Q-in-Q tunneling and 9000-byte jumbo frames. Sites requiring 10 GbE uplinks, modular expansion slots or fanless silent operation in office cabinets should evaluate other models.
Four Ultra PoE ports set the power budget
Each of the four primary RJ45 ports delivers up to 15.4 W under IEEE 802.3af or higher output under 802.3at and Ultra PoE, with end-span, mid-span and UPoE supply modes. The total available PoE power depends on the external supply chosen, so match the power source to the connected load before deployment.
Highlights
- Ultra PoE supplies up to 15.4W per port for connected devices
- Industrial DIN-rail and wall-mount format suits harsh environments
- Layer 3 static routing handles IPv4 and IPv6 traffic
- 8K MAC table and 4MB buffer maintain wire-speed forwarding
- Comprehensive security with 802.1X, RADIUS and TACACS+ authentication
Specifications
| Brand | PLANET |
|---|---|
| Model | IGS-5225-4UP1T2S |
| Format | DIN Rail Kit and Wall-mount Kit |
| Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet ready RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 206 |
| Network Management Type | Managed |
| Primary Ports | 5 x RJ45 + 2 SFP |
| Primary Port Speed | 10/100/1000Mbps |
| MAC Address Table | 8K |
| Switching Method | Store and Forward |
| VLAN Support | 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4095 VLAN IDs |
| Jumbo Frames | 9000 bytes |
| Buffer Memory | 4MB |
| Protocols | Routing Protocols: IPv4 software static routing IPv6 software static routing |
| Security | IEEE 802.1X Port-based / MAC-based network access authentication Built-in RADIUS client to cooperate with the RADIUS servers TACACS+ login users access authentication RADIUS / TACACS+ users access authentication IP-based Access Control List (ACL) MAC-based Access Control List Source MAC/IP address binding DHCP snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks IP address access management to prevent unauthorized intruder |
| PoE | PoE Standard: IEEE 802.3af/802.3at/Ultra PoE PSE PoE Power Supply Type: End-span / Mid-span / UPoE PoE Power Output: IEEE 802.3af Standard: Per port 48V - 52V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard: Per port 52V - 56V DC (depending on the power supply), max. 36 watts Ultra PoE: Per port 48V - 56V DC (depending on the power supply), max. 72 watts Power Pin Assignment: End-span: 1/ 2(-), 3/6 (+) Mid-span: 4/5 (+), 7/8 (-) UPoE: 1/2 (-), 3/6 (+),4/5 (+), 7/8 (-) PoE Power Budget: 240W maximum (depending on power input) PoE Ability PD at 15 watts: 4 uni |
| SNMP | Yes |
| QoS | Traffic classification based, strict priority and WRR 8-level priority for switching: Port number 802.1p priority 802.1Q VLAN tag DSCP / ToS field in IP packet |
| LACP | Yes |
| Layer | 3 |
| Port Mirroring | 1-to-1 monitor |
| LEDs | System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) DIDO ( Red ) Per 10/100/1000T RJ45 Ports: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green) 802.3at/af PoE-in-use x1 (Orange) PoE Usage: 60W, 120W, 180W, 240W (Green) |
| Button | Reset Button: < 5 sec: System reboot > 5 sec: Factory default |
| Power | Dual 48 - 56V DC (>53V DC for PoE+ output recommended) Max. 6.6 watts / 22.52BTU (Power on without any connection) Max. 282 watts / 962.22BTU (Full loading with Ultra PoE function) |
| Features | Physical Port: 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with Ultra PoE Injector 1 10/100/1000BASE-T Gigabit Ethernet RJ45 ports ports 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection 1 RJ45 console interface for basic management and setup Industrial Case and Installation: IP30 aluminum case DIN rail and wall-mount design 48 - 56V DC, redundant power with polarity reverse protect function Supports 6000V DC Ethernet ESD protection -40 to 75 degrees C operating temperature Digital Input and Digital Output: 2 Digital Input (DI) 2 Digital Output (DO) Integrate senso |
| Dimensions | 5.98" x 2.83" x 4.21" |
| Weight | 2.32 lbs. |
| Temperature | Operating: -40 - 75 degree Celsius Storage: -40 - 85 degree Celsius |
| Humidity | 5% - 95%, Non-condensing |
| Shipping weight | 1.59 kg |
| Package size | 229 × 184 × 149 mm |
Questions about this item
What mounting hardware is included for the DIN rail and wall-mount format?
The switch ships with a DIN Rail Kit and a Wall-mount Kit for industrial installation.
How do you power the four Ultra PoE RJ45 ports, and which step is often missed?
Connect a 48V-52V DC source to the terminal block; the step often missed is verifying the supply voltage matches the 48V-52V range before enabling PoE.
When should the SFP transceivers in the two 100/1000X slots be replaced?
Replace transceivers when link errors increase or after a firmware upgrade that changes supported 100/1000X modes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SonicWall
SonicWall 01-SSC-1435 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$357.99
0.00429281BTC
In stock
