We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal industrial network switch with eight RJ45 ports and two SFP slots

PLANET

PLANET IGS-10020MT 8-port 10/100/1000T + 2-port SFP managed network switch

SKU CH-44Q7-TKAVW MPN IGS-10020MT

Industrial managed Gigabit switch with eight copper ports, two SFP slots, VLAN, QoS and LACP, operating from -40 to 75 °C

  • FormatWall Mountable
  • StandardsIEEE 802.3 10Base-T IEEE 802.3u 100Base-TX / 100Base-FX IEEE
  • Network Management TypeManaged
  • Primary Ports8 x 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports 2 x 1000Ba
  • MAC Address Table8K entries, automatic source address learning and ageing
  • VLAN SupportYes
  • Operates reliably from -40 to 75 degrees Celsius in harsh industrial environments
  • Eight Gigabit RJ-45 ports plus two SFP slots for flexible copper or fibre uplinks
  • Managed Layer 2 switching with VLAN, QoS, LACP and SNMP v3 security
  • Redundant 12 to 48 V DC or 24 V AC power inputs maintain uptime
  • IP30 rugged metal case wall-mountable for space-constrained cabinets

Industrial Gigabit Switch

The PLANET IGS-10020MT is a managed Layer 2 switch built for harsh industrial environments. It operates reliably across a temperature range of -40 to 75 degrees Celsius inside an IP30-rated wall-mountable enclosure. Dual redundant DC power inputs accept 12 to 48 volts, with an optional AC 24V adapter available. The switch targets automation, transportation and outdoor networking projects that demand hardened hardware.

8 Copper Ports Plus 2 SFP Uplinks

Eight RJ-45 ports deliver 10/100/1000Base-T connectivity with auto-MDI/MDI-X, while two SFP slots accept 100 or 1000Base-X transceivers for fiber uplinks. A 512 kilobyte buffer and 9KB jumbo frame support handle bursty industrial traffic. The MAC table holds 8K entries and up to 255 VLAN groups can be configured from the 4095 available VLAN IDs. Maximum throughput is limited to Gigabit speeds on every port.

Managed Features For Deterministic Networks

Full management includes SSH, SSL, SNMP v3, IEEE 802.1Q VLANs, QoS with eight priority queues and LACP link aggregation across five trunk groups. Port mirroring supports TX, RX or both directions for diagnostics. IPv4 and IPv6 stacks enable integration into modern automation architectures. The switch requires external SFP modules for fiber links and provides no PoE power for connected devices.

Highlights

  • Operates reliably from -40 to 75 degrees Celsius in harsh industrial environments
  • Eight Gigabit RJ-45 ports plus two SFP slots for flexible copper or fibre uplinks
  • Managed Layer 2 switching with VLAN, QoS, LACP and SNMP v3 security
  • Redundant 12 to 48 V DC or 24 V AC power inputs maintain uptime
  • IP30 rugged metal case wall-mountable for space-constrained cabinets

Specifications

BrandPLANET
ModelIGS-10020MT
FormatWall Mountable
StandardsIEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX / 100Base-FX
IEEE 802.3z Gigabit SX / LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC
Network Management TypeManaged
Primary Ports8 x 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
2 x 1000Base-SX/LX/BX SFP interfaces (Port-9 and Port-10)
MAC Address Table8K entries, automatic source address learning and ageing
VLAN SupportYes
Jumbo Frames9KB
Buffer Memory512 kilobytes
SecuritySSH, SSL, SNMP v3
PoENo
SNMPYes
QoSYes
LACPYes
Layer2
Port MirroringTX / RX / Both Many-to-1 monitor
LEDsSystem:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
R.O. (Green)
Per 10/100/1000T RJ-45 Ports:
Power LNK / ACT (Green)
1000 (Orange)
Per SFP Interface:
LNK / ACT (Green)
1000 (Orange)
PowerPower Requirements: DC 12 to 48V. AC 24V power adapter
Power Consumption: 10 watts / 34 BTU (full loading)
Features8-Port 10/100/1000Base-T RJ-45 copper
2 x 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection
IEEE 802.1Q Tagged VLAN
Up to 255 VLANs groups, out of 4095 VLAN IDs
802.3ad Link Aggregation Control Protocol (LACP)
Maximum 5 trunk groups, up to 10 ports per trunk group
8 priority queues on all switch ports
Dimensions2.20" x 3.46" x 5.31"
Weight1.59 lbs.
TemperatureOperating Temperature: -40 ~ 75 degree Celsius
Storage Temperature: -40 ~ 75 degree Celsius
HumidityOperating Humidity: 5% ~ 95% non-condensing
Storage Humidity: 5% ~ 95% non-condensing
Shipping weight0.72 kg
Package size136 × 89 × 56 mm

Questions about this item

Will the 10/100/1000T RJ-45 ports negotiate correctly with my older 10Base-T and 100Base-TX devices?

Yes, the eight RJ-45 ports follow IEEE 802.3, 802.3u and 802.3ab, so they auto-negotiate down to 10 Mbps or 100 Mbps full or half duplex without manual configuration.

Which front-panel LEDs confirm the switch has booted and both power inputs are live?

The System section shows Power 1 and Power 2 LEDs glowing green when each 12–48 V DC or 24 V AC source is present; the Fault Alarm LED stays off in normal operation.

Does the box include SFP transceivers for the two 100/1000X slots, or must I purchase them separately?

The switch ships with the IP30 metal case, wall-mount brackets and a 24 V AC power adapter; SFP modules for the mini-GBIC slots are not included and must be bought separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.