We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black full-motion TV wall mount with dual articulating arms, compact folded profile

Pipishell PIMFK1 Full Motion TV Mount 26-74 inch 45kg VESA 400x400mm Black

SKU CH-1QD4-8XYSS

Full-motion wall bracket holds 26–74 inch screens up to 45 kg, tilts +5°/–15°, swivels ±45°, extends to 15.34 in and folds to 3.98 in

  • Name26-74 inch TVs
  • Mount StyleWall Mount
  • ColorBlack
  • TV Size Capacity26-74 inch TVs
  • TV Weight Capacity45 kilograms
  • Height8.0 in
  • Fits 26-74 inch TVs up to 45kg with VESA patterns 100x100 to 400x400mm
  • Extends 15.34 inches for multi-angle viewing and retracts to 3.98 inches for a low-profile look
  • Tilts +5 to -15 degrees and swivels ±45 degrees to reduce glare and customise viewing angles
  • Dual articulating steel arms with security locks provide secure mounting on 12, 16 or 24 inch wood studs
  • Includes pre-assembled components, hardware and manual for straightforward installation

Universal compatibility for 26-74 inch screens

The Pipishell PIMFK1 full-motion bracket fits most 26-74 inch LED, LCD, OLED and 4K televisions with VESA patterns from 100x100 mm up to 400x400 mm. It mounts to 12, 16 or 24 inch wood studs as well as concrete or brick walls. The dual articulating arms are built from heavy-gauge steel and support displays weighing up to 45 kilograms.

Capacity and headroom

A 45 kilogram weight limit covers typical 74 inch panels with comfortable margin, while the 400x400 mm maximum VESA pattern accommodates most large-screen mounting hole layouts. The arm extends 15.34 inches from the wall for corner viewing and retracts to 3.98 inches for a flush appearance. Installations on 24 inch stud spacing require a different model.

Full-motion articulation range

Vertical tilt adjusts +5 to -15 degrees to reduce glare, horizontal swivel reaches +/-45 degrees for multi-room sight-lines, and post-install level correction provides +/-3 degrees of fine-tuning. These three adjustments combine to give precise screen positioning from a single wall bracket.

Highlights

  • Fits 26-74 inch TVs up to 45kg with VESA patterns 100x100 to 400x400mm
  • Extends 15.34 inches for multi-angle viewing and retracts to 3.98 inches for a low-profile look
  • Tilts +5 to -15 degrees and swivels ±45 degrees to reduce glare and customise viewing angles
  • Dual articulating steel arms with security locks provide secure mounting on 12, 16 or 24 inch wood studs
  • Includes pre-assembled components, hardware and manual for straightforward installation

Specifications

BrandPipishell
ModelPIMFK1
Name26-74 inch TVs
Mount StyleWall Mount
ColorBlack
TV Size Capacity26-74 inch TVs
TV Weight Capacity45 kilograms
Height8.0 in
Width20.8 in
Weight4.119 kilograms

Questions about this item

Will the 400x400mm VESA plate on this mount align with the existing holes on my older 74 inch TV?

Yes, the bracket supports VESA patterns from 100x100mm up to 400x400mm, covering the 400x400mm pattern used on many 74 inch models.

How can I confirm the dual arms are holding the TV level after I mount it?

Use the built-in +/-3 degree leveling adjustment and check the bubble level on the wall plate; the TV should sit flush at 3.98 inches from the wall when fully retracted.

Does the box include lag bolts for 16 inch wood studs or must I buy them separately?

Standard mounting hardware for wood studs and concrete is included; the manual lists the supplied lag bolts and anchors for 12, 16 and 24 inch stud spacing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.