We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black full-motion TV wall mount with articulated steel arm, single-stud plate, extends 18.7 in retracts 2.3 in

Pipishell PIMF11 Full Motion TV Mount 26-60 Inch 77 lbs VESA 400x400mm

SKU CH-SAH2-PA6ZN

Full-motion TV bracket fits 26-60 inch screens up to 77 lbs with VESA 75x75 to 400x400mm, offering 180° swivel, +5°/-15° tilt, 2.3 to 18.7 inch extension, and single-stud installation on wood.

  • NameFits 26-60 Inch TVs up to 77lbs
  • Mount StyleWall Mount
  • ColorBlack
  • TV Size CapacityFits 26-60 Inch TVs up to 77lbs
  • TV Weight Capacity77 pounds
  • Height6.5 in
  • Fits most 26-60 inch TVs up to 77 lbs with VESA 75x75 to 400x400mm
  • Extends 18.7 inches and retracts to 2.3 inches for flexible viewing distance
  • Swivels 180° and tilts +5°/-15° for optimal angle from any seat
  • Single-stud centered design enables secure corner installation on wood, concrete or brick
  • Reinforced steel arm and wide wall plate hold 77 lbs with +/-3° post-install leveling

Fits 26-60 Inch TVs up to 77 lbs

The Pipishell PIMF11 full-motion TV mount supports screens from 26 to 60 inches weighing up to 77 lbs. It accommodates VESA patterns from 75x75 mm to 400x400 mm. The bracket extends from 2.3 in to 18.7 in and provides 180° swivel with +5°/-15° tilt.

Single-stud design for corners and tight spaces

The centered single-stud plate suits wood stud, concrete, or brick walls and works well in corners or rooms where furniture limits space. Buyers needing a dual-stud mount for heavier loads or a fixed low-profile bracket should consider other options.

Included hardware and post-install leveling

The box contains standard mounting hardware for wood, concrete, and brick plus step-by-step instructions. A +/-3° leveling adjustment lets you fine-tune the TV position after the bracket is secured to the wall.

Highlights

  • Fits most 26-60 inch TVs up to 77 lbs with VESA 75x75 to 400x400mm
  • Extends 18.7 inches and retracts to 2.3 inches for flexible viewing distance
  • Swivels 180° and tilts +5°/-15° for optimal angle from any seat
  • Single-stud centered design enables secure corner installation on wood, concrete or brick
  • Reinforced steel arm and wide wall plate hold 77 lbs with +/-3° post-install leveling

Specifications

BrandPipishell
ModelPIMF11
NameFits 26-60 Inch TVs up to 77lbs
Mount StyleWall Mount
ColorBlack
TV Size CapacityFits 26-60 Inch TVs up to 77lbs
TV Weight Capacity77 pounds
Height6.5 in
Width24.0 in
Weight2.82 kilograms

Questions about this item

Does my TV need a specific VESA pattern between 75x75 mm and 400x400 mm to fit the PIMF11 mount?

Yes, the mount supports VESA patterns from 75x75 mm up to 400x400 mm, and your TV must fall within that range along with the 26-60 inch size and 77 lbs weight limit.

Can I install the PIMF11 on a single wood stud if my existing bracket required two studs?

Yes, the PIMF11 is designed for single-stud mounting on wood studs, concrete, or brick, so you can use it where a dual-stud bracket would not fit.

How do I confirm the PIMF11 is level and secure after mounting my TV?

Use the built-in +/-3° leveling adjustment to fine-tune the TV position, then verify the mount retracts to 2.3 in and extends smoothly to 18.7 in without shifting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.