We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular differential probe with BNC connector and hook tips, 187 by 83 by 41 millimetres

Pintech

Pintech PT-8001 Differential Probe 700V 25MHz 10X/100X BNC measurement tool

SKU CH-26J8-7VWR9 MPN PT-8001

Measures differential signals up to 700 V with 25 MHz bandwidth, 10X/100X attenuation, 14 ns rise time and BNC output

  • Size/Dimensions187*83*41 mm
  • Selling UnitEach
  • TypeElectrical Testing & Measuring
  • Accuracy±2%
  • Standards/CertificationsCE
  • Measures fast edges with 14 ns rise time
  • Captures signals up to 25 MHz bandwidth
  • Switches 10X or 100X attenuation for flexible range
  • High CMRR rejects common-mode noise at 50 Hz and 20 kHz
  • Compact 187 × 83 × 41 mm probe fits tight workspaces

Differential probe for floating measurements

The Pintech PT-8001 is a 25 MHz active differential probe designed to convert two-point signals into ground-referenced outputs for oscilloscopes and data-acquisition gear. It targets engineers and technicians who must measure motor drives, power electronics or other circuits where neither test point sits at earth potential. CE certification and ±2 % typical accuracy support lab and field validation work.

BNC output drives standard oscilloscope inputs

A BNC connector feeds any scope presenting a 1 MΩ input, so no specialised front-end is required. Selectable 10X or 100X attenuation extends the differential voltage range to 70 V or 700 V respectively, while common-mode rejection exceeds 80 dB at 50 Hz and 66 dB at 20 kHz. The probe draws power from the measured circuit, freeing the bench from an extra mains adapter.

Hook tips and adapter simplify connection

The package includes two probe hooks and an adapter, letting you clip onto dense component leads or test points without soldering flying leads. A printed manual covers the 14 ns rise time, 4 MΩ//0.59 pF differential input impedance and 7 V output swing into 50 kΩ, so you can verify loading effects before connecting to sensitive nodes.

Highlights

  • Measures fast edges with 14 ns rise time
  • Captures signals up to 25 MHz bandwidth
  • Switches 10X or 100X attenuation for flexible range
  • High CMRR rejects common-mode noise at 50 Hz and 20 kHz
  • Compact 187 × 83 × 41 mm probe fits tight workspaces

Specifications

BrandPINTECH
ModelPT-8001
Size/Dimensions187*83*41 mm
Selling UnitEach
TypeElectrical Testing & Measuring
Accuracy±2%
Standards/CertificationsCE

Questions about this item

How much heat does the PT-8001 generate when left on continuously?

The probe body weighs 400g and measures 186x84x38 mm, so it dissipates heat passively without a fan during all-day use.

What oscilloscope input impedance is required for the PT-8001 to meet its ±2% accuracy?

The probe is calibrated for a 1M ohm oscilloscope input, which is the standard setting on most bench scopes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.