We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey high-voltage oscilloscope probe, long cylindrical body with BNC connector

Pintech

Pintech P6018A 1000:1 100MHz 18kV DC 12kV AC measurement tool

SKU CH-MM35-S656J MPN P6018A

High-voltage oscilloscope probe with 1000:1 attenuation, 100 MHz bandwidth, 18 kV DC and 12 kV AC rating, BNC connector, CE certified

  • Size/Dimensions80*80*320 mm
  • Selling UnitEach
  • TypeElectrical Testing & Measuring
  • Accuracy=3%
  • Standards/CertificationsCE
  • Measures up to 18 kV DC and 12 kV AC for high-voltage signal testing
  • 1000:1 attenuation reduces voltage at the oscilloscope input for safer operation
  • 100 MHz bandwidth with 3.5 ns rise time captures fast transients accurately
  • Standard BNC connector fits any oscilloscope without adapters
  • Compact 80 × 80 × 320 mm design weighs 460 g for portable bench or field use

High-Voltage Oscilloscope Probe

The Pintech P6018A is a new high-voltage probe designed for oscilloscope measurements up to 18 kV DC or 12 kV AC RMS. It provides a 1000:1 attenuation rate and 100 MHz bandwidth for safe signal capture. The probe connects via a standard BNC interface.

Suited for High-Voltage Signal Analysis

This probe suits engineers and technicians measuring high-voltage DC or AC signals within the stated limits. It is not for users needing higher voltage handling, greater bandwidth, or a different attenuation ratio. Buyers requiring CAT safety ratings should verify suitability separately.

1000:1 Attenuation Defines Safe Range

The 1000:1 attenuation ratio reduces the input signal so the oscilloscope sees a safe, measurable level. This single specification determines the maximum voltage the probe can handle and the sensitivity required from the scope. Match this ratio to your instrument's input range.

Highlights

  • Measures up to 18 kV DC and 12 kV AC for high-voltage signal testing
  • 1000:1 attenuation reduces voltage at the oscilloscope input for safer operation
  • 100 MHz bandwidth with 3.5 ns rise time captures fast transients accurately
  • Standard BNC connector fits any oscilloscope without adapters
  • Compact 80 × 80 × 320 mm design weighs 460 g for portable bench or field use

Specifications

BrandPINTECH
ModelP6018A
Size/Dimensions80*80*320 mm
Selling UnitEach
TypeElectrical Testing & Measuring
Accuracy=3%
Standards/CertificationsCE

Questions about this item

How much noise does the P6018A add to the signal when it runs continuously?

The probe specifies a noise figure better than 60 dB at 1 kHz and better than 50 dB at 1 MHz, so added noise remains low during extended use.

What oscilloscope input must I already have for the P6018A to connect?

A standard BNC input on the oscilloscope is required; the probe ships with a BNC connector for direct attachment.

Will the P6018A load down vintage scopes with 1 MΩ inputs?

Its 200 MΩ input impedance and 1.7 pF capacitance present a very light load, so older 1 MΩ scopes see minimal additional loading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.