We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact cylindrical DLP replacement lamp with gold-plated caps and PGJX50 base

Philips

Philips MSR Gold 700/2 MiniFastFit Lamp Fine Art Fine I 700E Performance DLP Replacement Lamp

SKU CH-9QYW-HVZH2

A 700W replacement lamp delivering 46000 lumens at 7500K with CRI 73 for DLP projectors using the PGJX50 base

  • TypeProject Lamp
  • Weight0.0520
  • High-output 46000 lumens for bright stage illumination
  • Crisp 7500K white light with CRI 73 for accurate color rendering
  • FastFit design enables quick lamp replacement during shows
  • Gold-plated caps protect against heat for longer lamp life
  • 750-hour rated life at 50% failure point for dependable operation

700W Entertainment Lamp

The Philips MSR Gold 700/2 MiniFastFit is a 700W AC discharge lamp built for touring, stage, studio and event fixtures that require a PGJX50 base. It delivers 46000 lumens at 7500K with a CRI of 73 for high-intensity, pure white output. The lamp weighs 0.0520 and carries part number 286922. It is supplied new for professionals who need consistent on-stage color and fast serviceability.

PGJX50 Base and 750-Hour Life

The lamp uses a PGJX50 cap-base and runs at a nominal 10.2A current with a rated life of 750 hours to 50 percent failures. P3 technology allows universal operating position and higher temperature operation to maintain output over that life. Gold-plated caps provide heat protection to reduce premature failure. Dimmable operation is supported, but the fixture must supply the correct AC power and control gear for this specific lamp type.

Check Fixture Compatibility

Verify that your fixture accepts a PGJX50 base and is rated for a 700W MSR Gold lamp with 10.2A nominal current. Confirm the ballast or driver supports dimmable operation if that feature is required. Ensure the fixture’s thermal design can handle the lamp’s operating temperatures and that the MiniFastFit form factor matches the lamp housing. Buyers needing a different base, wattage or longer rated life should look for an alternative lamp.

Highlights

  • High-output 46000 lumens for bright stage illumination
  • Crisp 7500K white light with CRI 73 for accurate color rendering
  • FastFit design enables quick lamp replacement during shows
  • Gold-plated caps protect against heat for longer lamp life
  • 750-hour rated life at 50% failure point for dependable operation

Specifications

BrandJaspertronics
ModelFine Art Fine I 700E Performance-LAMP
Part NumberFine Art Fine I 700E Performance-LAMP
TypeProject Lamp
Weight0.0520

Questions about this item

Should I choose the 700 W version or a different wattage for the Fine Art Fine I 700E Performance?

The fixture is built around a 700 W MSR Gold 700/2 MiniFastFit lamp; only that wattage matches the PGJX50 base and 10.2 A current spec.

What does the 46,000 lumen output mean once the lamp is installed in the projector?

It delivers a high-intensity 7500 K white beam with CRI 73, giving strong on-stage color rendering for the rated 750-hour life.

How does the PGJX50 base and 10.2 A current affect compatibility and performance?

The PGJX50 cap-base and 10.2 A nominal current lock the lamp to fixtures designed for that exact interface, enabling universal operating position and dimmable operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.