We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange PHCC PRO SERIES float switch with plug and two-foot cord

Phcc Pro Series

Phcc Pro Series chassis part

SKU CH-KAQ3-6D3H8

Alternates two primary pumps to extend lifespan and signals failure with a flashing LED

  • Alternates two pumps to extend their service life
  • Detects pump failure after three attempts and flashes an alert
  • LED confirms 115VAC power is present
  • Adjustable 5 to 45 sec timer exercises pumps weekly
  • 2 ft plug-in cord for straightforward installation

Pump Alternation & Failure Detection

This PHCC PRO SERIES float switch manages two primary pumps by alternating their activation to distribute wear evenly. It automatically switches to the backup pump if the primary unit fails to start. After three consecutive failures the device triggers a flashing indicator to identify the defective pump without guesswork.

Voltage & Wiring Verification

Confirm the system runs on 115VAC before installation as the switch is rated for this voltage only. The unit connects via a plug with a 2 ft lead so ensure the power receptacle is within reach. The adjustable timer runs from 5 to 45 sec and activates the pump weekly to exercise the mechanism and extend service life.

Replaces Single-Pump Controllers

This part upgrades basic single-pump float switches that offer no redundancy or automatic alternation. The jump is worth it when a backup pump is already installed but lacks a smart controller to balance runtime and signal failures. It is not suited for systems that require DC voltage operation or more than two pump outputs.

Highlights

  • Alternates two pumps to extend their service life
  • Detects pump failure after three attempts and flashes an alert
  • LED confirms 115VAC power is present
  • Adjustable 5 to 45 sec timer exercises pumps weekly
  • 2 ft plug-in cord for straightforward installation

Specifications

BrandPHCC PRO SERIES

Questions about this item

What comes with the PHCC PRO SERIES DFC1.5 float switch and do I need extra parts?

The unit is supplied with a 2 ft cord and plug for 115VAC connection. It controls two primary pumps so both pump units and discharge piping must be purchased separately.

How do I choose between the available versions of this float switch?

The model DFC1.5 is a normally-open, caged dual micro-reed switch rated for 115VAC. No other voltage or contact configurations are offered for this part number.

What does the 115VAC rating mean when the switch is installed in my RV system?

It connects directly to standard 115VAC shore power or generator supply. The adjustable 5 to 45 sec timer cycles each pump weekly and the flashing LED confirms power is present.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.