pgroup 1/4-Inch Drive 90-Tooth Ratchet Wrench 5" with 2" Extension Bar
A 1/4-inch drive ratchet with 90-tooth mechanism, 4° arc swing, quick-release, reversible action, Cr-Mo head, Cr-V handle and a 2-inch extension bar
- Selling UnitCount
- Overall Length5 inches
- Tight access work enabled by 90-tooth design with 4° arc swing
- One-handed socket changes via quick-release button
- Comfortable grip from ergonomic handle design
- Corrosion resistance from fully polished chrome finish
- Extended reach with included 2-inch extension bar
90-Tooth Ratchet for Tight Spaces
The pgroup 1/4-inch drive ratchet wrench uses a 90-tooth mechanism that delivers a 4° arc swing, letting you turn fasteners where a standard ratchet cannot reach. It is built for technicians and DIYers who need precise engagement in confined engine bays, equipment panels or furniture joints. The quick-release button and reversible lever allow one-handed socket changes and direction switches without removing the tool from the bolt.
Chrome-Moly Head Handles 10 lb-ft
A chrome-molybdenum ratchet head paired with a chrome-vanadium steel handle is rated to withstand 10 lb-ft of torque without deforming. The fully polished chrome finish resists rust and wipes clean after exposure to oil, coolant or shop grime. An ergonomic grip contours to the palm, reducing hand fatigue during repetitive tightening or loosening cycles.
2-Inch Extension Bar Adds Reach
The included 2-inch extension bar lets the 5-inch wrench reach recessed fasteners without resorting to a longer handle that would limit swing clearance. No additional sockets, adaptors or storage case are supplied, so users must provide their own 1/4-inch drive socket set. The kit suits maintenance tasks where a compact, high-tooth-count ratchet and a short reach extender are the only extras required.
Highlights
- Tight access work enabled by 90-tooth design with 4° arc swing
- One-handed socket changes via quick-release button
- Comfortable grip from ergonomic handle design
- Corrosion resistance from fully polished chrome finish
- Extended reach with included 2-inch extension bar
Specifications
| Brand | pgroup |
|---|---|
| Selling Unit | Count |
| Overall Length | 5 inches |
Questions about this item
How do I attach the 2-inch extension bar to the 1/4-inch drive ratchet, and what step is often missed?
Align the bar's square drive with the ratchet head, push until the detent ball clicks into the groove, then pull gently to confirm it locks — skipping the pull-check is the common error.
What maintenance will the Cr-Mo ratchet head and Cr-V handle need over time?
Wipe the polished chrome finish after each use, apply light machine oil to the 90-tooth gear mechanism periodically, and inspect the quick-release button spring for debris buildup.
At what torque limit does the 90-tooth ratchet head reach its design maximum under sustained use?
The Cr-Mo head is rated to withstand up to 10 lb-ft of torque; exceeding this value risks permanent deformation of the gear teeth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
