Pferd
Pferd 67196 POLIFAN Z SGP CURVE STEELOX Flap Disc
A 5-inch zirconia alumina flap disc with 40 grit for coarse grinding on steel and stainless steel, rated to 12,200 RPM
- TypeCarpet Seam Binders
- Zirconia alumina cuts steel and stainless fast
- Coarse 40 grit removes heavy stock quickly
- 5-inch radial disc fits standard angle grinders
- Fiberglass backing runs up to 12,200 RPM safely
- Curved profile follows contours for smooth finishes
PFERD 67196 Z SGP CURVE STEELOX Flap Disc
This PFERD 67196 flap disc uses zirconia alumina abrasive on a fiberglass backing plate. It measures 5 inches in diameter with a 7/8 inch unthreaded arbor hole. The disc is rated for a maximum operating speed of 12,200 RPM and features a coarse 40 grit for aggressive material removal.
Who This Suits and Who Should Look Elsewhere
This disc suits metalworkers grinding and finishing steel and stainless steel on angle grinders. The curved radial design helps with contoured surfaces and edge work. Buyers needing finer surface finishes or working on non-ferrous metals like aluminum should look at different grits or abrasive types.
Key Specification: 40 Grit Zirconia Alumina
The 40 grit zirconia alumina coating determines the cut rate and surface finish. This coarse grade removes stock quickly on steel and stainless steel. Confirm your grinder reaches 12,200 RPM maximum speed and accepts a 7/8 inch unthreaded arbor before fitting this disc.
Highlights
- Zirconia alumina cuts steel and stainless fast
- Coarse 40 grit removes heavy stock quickly
- 5-inch radial disc fits standard angle grinders
- Fiberglass backing runs up to 12,200 RPM safely
- Curved profile follows contours for smooth finishes
Specifications
| Brand | Pferd |
|---|---|
| Type | Carpet Seam Binders |
Questions about this item
Will the 7/8 in unthreaded hole fit the spindle on my existing 5 in angle grinder?
The 7/8 in unthreaded hole matches the standard arbor on most 5 in angle grinders, so it mounts directly without an adapter.
How can I confirm the Z SGP CURVE STEELOX disc is running true after I mount it?
Start the grinder at low speed and watch for wobble; a properly seated disc runs smoothly up to the 12,200 RPM limit with no vibration.
Does the box include a backing pad or mounting nut, or do I need to buy them separately?
The flap disc has a built-in fiberglass backing plate, so no separate backing pad or nut is required for installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
