Petra
Petra Wideband 50 Ohm Directional Antenna N Female WSN314411
A directional antenna covering 700 to 2700 MHz with up to 10.5 dBi gain, 50 Ohm impedance, N female connector and pole-mount hardware for weather-resistant outdoor use
- TypeAudio Amplifiers\Preamplifiers
- ColorWhite
- Strong signal across 700-2700 MHz band
- Durable aluminium build resists harsh weather
- Focused 70-90° horizontal beam improves gain
- Handles up to 100 W transmitter power
- Simple pole mounting with included hardware
Wilson 700-2700 MHz directional antenna
This Wilson directional antenna covers 700-2700 MHz with a 50 Ohm impedance and N female connector. It provides gain from 7 dBi to 10.5 dBi across the band and handles up to 100 W. The aluminium housing is weather resistant and rated for -40 to 158 deg F with 134 MPH wind survival.
Installers needing focused coverage on poles
Suits installers who need a directional pattern with 70-90 deg horizontal and 85-110 deg vertical beamwidths for point-to-point or sector coverage. The >20 dB front-to-back ratio helps reject interference from the rear. Not for systems requiring omnidirectional radiation or connectors other than N female.
50 Ohm impedance with N female connector
The antenna presents a 50 Ohm load and terminates in an N female connector, so it matches 50 Ohm amplifiers and cables directly. Mismatched impedance or a different connector type would require additional adapters or a different antenna.
Highlights
- Strong signal across 700-2700 MHz band
- Durable aluminium build resists harsh weather
- Focused 70-90° horizontal beam improves gain
- Handles up to 100 W transmitter power
- Simple pole mounting with included hardware
Specifications
| Brand | Wilson |
|---|---|
| Type | Audio Amplifiers\Preamplifiers |
| Color | White |
Questions about this item
How much power can the 50 Ohm directional antenna handle continuously?
The antenna is rated for a maximum input power of 100 W across its 700–2700 MHz range.
Which amplifier impedance must match the antenna's N female connector?
The antenna requires a 50 Ohm amplifier; its N female connector is designed for 50 Ohm coaxial cable and equipment.
Will the 8.27 by 2.56 by 11.42 inch antenna fit on my existing 2 inch diameter mounting pole?
Yes, the supplied pipe-mounting hardware is made for poles of 2 inch diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



