We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black full-motion TV wall mount with dual articulating arms, ultra-slim 1.1 inch profile

Perlegear PGTVM65B-LF-US Full Motion TV Mount 1.1" 42-90" VESA 600x400mm 132lbs

SKU CH-9PH2-VTWWQ

Full-motion wall bracket holds 42-90 inch TVs up to 132 lbs, extends 15 inches, swivels ±45°, tilts 5° up/15° down, and sits 1.1 inches from the wall

  • Mount StyleWall Mount
  • ColorBlack
  • Weight8.437 kilograms
  • Ultra-slim 1.1" profile sits flush against the wall for a minimalist look
  • Full motion with ±45° swivel, 5° up/15° down tilt and 15" extension for flexible viewing
  • Fits 42-90" TVs with VESA 200x200 to 600x400mm patterns up to 132 lbs
  • Extendable wall plate spans 16" to 24" studs plus concrete or brick for secure mounting
  • Heavy-duty steel construction passes 4x load test ensuring stable, long-lasting support

Mounting range and load

The Perlegear PGTVM65B-LF-US is a full-motion wall bracket built for 42-90 inch screens with VESA patterns from 200x200 up to 600x400mm. It supports displays weighing up to 132 lbs and fits wood studs spaced 16 to 24 inches apart, as well as concrete or brick walls. The design is not suitable for mounting on drywall alone.

Articulation and profile

Dual articulating arms let the screen extend up to 15 inches from the wall, swivel ±45 degrees and tilt 5 degrees up or 15 degrees down to cut glare. When retracted the mount sits just 1.1 inches from the wall for a flush, ultra-slim appearance. A post-installation level adjustment of ±3 degrees helps fine-tune alignment.

Installation notes

The package includes a paper template and all required hardware for wood, concrete and brick substrates. Heavy-gauge steel construction makes the unit weigh 8.437 kilograms, so two people are recommended for lifting and securing the wall plate. Drilling into studs or masonry anchors must be done accurately; the extendable plate offers some horizontal flexibility to centre the TV. Do not attempt installation on drywall without proper backing.

Highlights

  • Ultra-slim 1.1" profile sits flush against the wall for a minimalist look
  • Full motion with ±45° swivel, 5° up/15° down tilt and 15" extension for flexible viewing
  • Fits 42-90" TVs with VESA 200x200 to 600x400mm patterns up to 132 lbs
  • Extendable wall plate spans 16" to 24" studs plus concrete or brick for secure mounting
  • Heavy-duty steel construction passes 4x load test ensuring stable, long-lasting support

Specifications

BrandPerlegear
ModelPGTVM65B-LF-US
Mount StyleWall Mount
ColorBlack
Weight8.437 kilograms

Questions about this item

Does the 1.1" low-profile design leave enough clearance to reach the VESA mounting bolts for future TV swaps?

The mount extends up to 15" from the wall, allowing full access to the VESA plate and bolts for maintenance or TV replacement without removing the bracket.

At the maximum 15" extension with a 132 lb TV, does the arm sag or hit a mechanical stop first?

The dual articulating arms are rated for 132 lbs and tested to four times that load, so the structural limit is reached before any noticeable deflection occurs.

With the TV flush at 1.1", does heat buildup or fan noise become an issue during all-day use?

The 1.1" stand-off still permits airflow behind the display; the mount itself has no moving parts or electronics, so it adds zero noise or heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.