We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular metal media converter unit with SC fiber ports and power input

Perle

Perle S-1000Mm-S1Sc10D Media Converter 05060354

SKU CH-N1MJ-TT276

Converts 1000BASE-SX 850 nm multimode fibre up to 550 m to 1000BASE-BX single-strand single-mode fibre at 1490 nm TX / 1310 nm RX over 10 km

  • TypeData & Communication
  • Converts multimode to single-mode fiber for extended reach
  • 550 m multimode input range suits local links
  • 10 km single-mode output span covers campus distances
  • 850 nm and 1490/1310 nm wavelengths enable bidirectional traffic
  • Gigabit throughput handles high-bandwidth applications

Gigabit Fiber Media Converter

The Perle S-1000Mm-S1Sc10D converts between multimode and single-mode fiber links at Gigabit speed. It is built for network teams who must join different fiber types across a campus or metro span.

Multimode to Single-Mode Upgrade

This unit replaces a pair of matching transceivers when the installed plant mixes 850 nm multimode and 1310/1490 nm single-mode strands. The jump is worth it when existing cable runs cannot be replaced but the link must cross the distance gap between the two standards.

Distance Headroom

The multimode side reaches 550 m or 1804 ft while the single-mode side extends to 10 km or 6.2 miles. The converter handles the full span between a local switch and a remote site, but it cannot bridge runs that exceed the single-mode budget.

Highlights

  • Converts multimode to single-mode fiber for extended reach
  • 550 m multimode input range suits local links
  • 10 km single-mode output span covers campus distances
  • 850 nm and 1490/1310 nm wavelengths enable bidirectional traffic
  • Gigabit throughput handles high-bandwidth applications

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

What type of SC connectors does the media converter use for the multimode and single-mode fiber ports?

The converter uses SC connectors on both the 850 nm multimode side and the 1490/1310 nm single-mode side.

How is the unit powered during installation, and what is the common oversight?

It ships with a USA power cord that must be connected to a suitable AC outlet; the step often missed is verifying the outlet voltage matches the cord rating.

Which optical components may need replacement after extended use in a 10 km single-mode link?

The 1490 nm TX and 1310 nm RX transceivers on the single-mode port are the components most likely to require replacement over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.