We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular network module in matte black finish with SC fibre ports and status LEDs

Perle

Perle CM-100MM-S1SC40U Media Converter Mount

SKU CH-SQ4V-X80XP

Mounts a managed Fast Ethernet fiber-to-fiber converter module with SC connectors for multimode and single-mode links up to 40 km

  • TypeData & Communication
  • Managed Fast Ethernet fiber-to-fiber conversion
  • 100BASE-FX 1310 nm multimode SC up to 1.2 miles
  • 100BASE-BX 1310/1550 nm single-strand single-mode SC up to 24.9 miles
  • Operates in managed or unmanaged mode
  • Perle Systems 05062170 media converter module

Perle CM-100MM-S1SC40U media converter module

The Perle CM-100MM-S1SC40U is a managed Fast Ethernet fiber-to-fiber converter module designed for network operators extending links between multimode and single-mode infrastructure. It converts 100BASE-FX 1310nm multimode signals to 100Base-BX single-strand fiber using 1310nm TX and 1550nm RX wavelengths. SC connectors provide the physical interface for both fiber types. The module supports managed or unmanaged operation modes.

Sustained link performance over distance

The module maintains a 100 Mbps data rate across the full span without signal regeneration. Multimode segments reach 2 km or 1.2 miles at 1310nm. Single-mode segments reach 40 km or 24.9 miles using the single-strand BX wavelength pair. Managed operation allows remote monitoring of link health during continuous service.

Multimode to single-mode wavelength conversion

This module is specifically built to bridge 1310nm multimode SC fiber to 1310nm TX / 1550nm RX single-mode SC fiber over 40 km. It does not support dual-strand single-mode interfaces or other wavelength pairs. Buyers needing different connector types, distances, or unmanaged-only hardware should select an alternative model.

Highlights

  • Managed Fast Ethernet fiber-to-fiber conversion
  • 100BASE-FX 1310 nm multimode SC up to 1.2 miles
  • 100BASE-BX 1310/1550 nm single-strand single-mode SC up to 24.9 miles
  • Operates in managed or unmanaged mode
  • Perle Systems 05062170 media converter module

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

Does the CM-100MM-S1SC40U generate noticeable heat or noise when running continuously?

The module operates silently with no moving parts, so it produces minimal heat and no audible noise during all-day use.

What existing fiber cabling and connectors are required to install this converter?

You need duplex SC multimode fiber for the 100BASE-FX 1310 nm side and a single-strand SC single-mode patch cord for the 100BASE-BX 1310/1550 nm link.

Will this converter work with legacy 100 Mbps switches and media converters already in the rack?

Yes, it complies with 100BASE-FX and 100BASE-BX standards, so it interoperates with older Fast Ethernet equipment using matching wavelengths and distances.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.