We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle CM-100MM-M2ST2 media converter module in metal housing

Perle

Perle CM-100MM-M2ST2 Media Converter Mount

SKU CH-S6T8-71QQH

Mounts a managed Fast Ethernet fibre-to-fibre converter module with dual 100BASE-FX 1310 nm multimode ST ports spanning 1.2 miles

  • TypeData & Communication
  • Managed fiber-to-fiber conversion for flexible network design
  • 100BASE-FX multimode ST interfaces at 1310 nm wavelength
  • 2 km reach per segment extends campus links
  • Operates managed or unmanaged for simple deployment
  • Perle Systems reliability for critical data paths

Perle CM-100MM-M2ST2 Media Converter Mount

This Perle mount is designed to secure a CM-100MM-M2ST2 media converter module in a rack or enclosure. It suits network engineers and integrators deploying managed or unmanaged fiber-to-fiber conversion in enterprise or campus environments. The bracket provides a stable mechanical fit for the specified converter model.

Mounting hardware enables fixed installation

The included mounting hardware lets you fix the converter module securely, preventing movement that could stress fiber connections. This changes a loose module into a permanent part of your network infrastructure, supporting reliable 100BASE-FX links over 1310 nm multimode fiber with ST connectors up to 1.2 miles.

Verify converter model and rack space

Before ordering, confirm you are using the exact CM-100MM-M2ST2 module, as the mount is model-specific. Check that your rack or enclosure has the correct hole pattern and clearance for this bracket. Ensure your fiber patch cables use ST connectors compatible with the converter’s 1310 nm multimode interfaces.

Highlights

  • Managed fiber-to-fiber conversion for flexible network design
  • 100BASE-FX multimode ST interfaces at 1310 nm wavelength
  • 2 km reach per segment extends campus links
  • Operates managed or unmanaged for simple deployment
  • Perle Systems reliability for critical data paths

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

Will the ST connectors on the CM-100MM-M2ST2 need periodic cleaning or replacement?

ST connectors can accumulate dust on the ferrule end-face; a lint-free wipe and isopropyl alcohol before initial install and whenever links are reconnected keeps insertion loss low, but the connectors themselves are rated for the life of the module.

What limits continuous throughput on the CM-100MM-M2ST2?

Each port is fixed at 100 Mb/s full-duplex, so sustained traffic cannot exceed 100 Mb/s in either direction regardless of frame size or management mode.

How much power does the CM-100MM-M2ST2 draw when running all day?

The converter module draws its power from the host chassis backplane; total chassis draw depends on how many modules are installed, but a single 100BASE-FX module adds only a small incremental load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.