We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal mounting bracket for Perle media converter module, silver finish with screw holes

Perle

Perle CM-1000-S2ST10 Media Converter Mount

SKU CH-VWZR-T6SR7

Mounts a managed Gigabit media converter converting 1000BASE-T RJ-45 to 1000BASE-LX/LH 1310 nm single-mode ST fibre up to 10 km

  • TypeData & Communication
  • Managed or unmanaged operation for flexible deployment
  • 1000BASE-T RJ-45 copper port reaches 100 m/328 ft
  • 1000BASE-LX/LH single-mode fibre at 1310 nm extends to 10 km/6.2 miles
  • ST connector interface for secure fibre termination
  • Gigabit media conversion bridges copper and fibre networks

Managed Gigabit Media Converter

The Perle CM-1000-S2ST10 is a managed Gigabit media converter module designed for network administrators extending copper links over single-mode fibre. It bridges 1000BASE-T RJ-45 connections to 1000BASE-LX/LH optical interfaces for long-distance deployment.

Passive Mount Thermal Profile

As a passive mounting accessory, the unit adds no active cooling, draws no independent power and produces no audible noise. Thermal load and power consumption are determined entirely by the installed media converter module during normal operation.

ST Single-Mode 10 km Reach

The converter supports 1310 nm single-mode fibre terminated with ST connectors, delivering a maximum link distance of 10 km or 6.2 miles. Buyers needing multi-mode fibre, LC connectors or shorter reach specifications should verify compatibility before purchase.

Highlights

  • Managed or unmanaged operation for flexible deployment
  • 1000BASE-T RJ-45 copper port reaches 100 m/328 ft
  • 1000BASE-LX/LH single-mode fibre at 1310 nm extends to 10 km/6.2 miles
  • ST connector interface for secure fibre termination
  • Gigabit media conversion bridges copper and fibre networks

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

How do I install the CM-1000-S2ST10 module into the chassis, and which step do people miss?

Slide the module into a CM-1000 chassis slot until the ejector lever clicks; the step often missed is tightening the captive retention screw to secure the module and maintain grounding.

What maintenance or replacement will the CM-1000-S2ST10 need over time?

The ST single-mode connectors should be inspected and cleaned with a fibre scope and lint-free wipes; the 1310 nm transceiver itself has no user-serviceable parts and is replaced only if link budget degrades.

What limit appears first on the CM-1000-S2ST10 during sustained full-duplex traffic?

The 1000BASE-LX/LH optical budget for 10 km at 1310 nm is the first constraint; signal loss beyond the rated distance causes errors before the RJ-45 copper port reaches its 100 m limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.