We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle CM-1000-S2LC10 media converter module, silver metal enclosure with RJ-45 and LC ports

Perle

Perle CM-1000-S2LC10 Media Converter Mount

SKU CH-PTBK-K6F45

A managed Gigabit media converter module converts 1000BASE-T RJ-45 signals up to 100 m to single-mode fibre up to 10 km or multimode up to 550 m

  • TypeData & Communication
  • Gigabit copper to fibre conversion up to 10 km single-mode
  • Multimode reach of 550 m with mode-conditioning patch cord
  • 1310 nm wavelength for long-distance single-mode links
  • Managed or unmanaged operation for flexible deployment
  • RJ-45 to LC interface connects 1000BASE-T and 1000BASE-LX/LH

Gigabit Media Converter Module

The CM-1000-S2LC10 converts 1000BASE-T copper links to 1000BASE-LX/LH single-mode fibre at 1310 nm. It supports distances up to 10 km or 6.2 miles over single-mode and 550 m or 1804 ft over multimode with a mode-conditioning patch cord. Managed and unmanaged operation modes are available.

LC Fibre Interface and Distance Options

The LC connector enables direct connection to standard single-mode or multimode fibre patch cables. Single-mode reach extends to 10 km without intermediate equipment. Multimode reach reaches 550 m when a mode-conditioning patch cord is used. The RJ-45 copper port covers 100 m or 328 ft.

Copper Port and Fibre Type Compatibility

Verify that the existing network uses 1000BASE-T on RJ-45 and that the fibre plant is single-mode or multimode with LC terminations. Confirm whether managed features are required or if unmanaged operation is sufficient. Ensure a mode-conditioning patch cord is available for multimode runs.

Highlights

  • Gigabit copper to fibre conversion up to 10 km single-mode
  • Multimode reach of 550 m with mode-conditioning patch cord
  • 1310 nm wavelength for long-distance single-mode links
  • Managed or unmanaged operation for flexible deployment
  • RJ-45 to LC interface connects 1000BASE-T and 1000BASE-LX/LH

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

Will the LC fiber connector or RJ-45 port need replacement after extended use?

The LC and RJ-45 interfaces are passive connectors with no moving parts; they typically last the life of the module unless physically damaged.

What distance limit appears first when running the link continuously at 1000 Mbps?

Multimode fiber with a mode conditioning patch cord reaches 550 m or 1804 ft, while single mode extends to 10 km or 6.2 miles.

How much heat or noise does the CM-1000-S2LC10 produce during all-day operation?

The module has no fan and draws minimal power, so it runs silently with only slight warmth under continuous load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.