We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle C-110 media converter, compact metal box, RJ-45 and SC ports

Perle

Perle C-110-S2SC20 Media Converter 10/100Base-TX to 100Base-LX 1310nm SC 20km

SKU CH-A6KF-10091

Converts 10/100Base-TX copper to 100Base-LX single-mode fibre at 1310 nm over 20 km with SC connector and 2048-byte frame support

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Converts copper to fibre for 20 km reach
  • RJ-45 port handles 10/100 Mbps over 100 m
  • Single-mode SC interface runs at 1310 nm wavelength
  • Maximum frame size of 2048 bytes supported
  • Link distance reaches 12.4 miles on single-mode fibre

Perle C-110-S2SC20 Media Converter

The Perle C-110-S2SC20 is a 10/100Base-TX to 100Base-LX media converter module. It connects RJ-45 copper links up to 100 metres with single-mode SC fibre at 1310 nm over 20 kilometres. Network engineers use it to extend LAN segments beyond standard copper distance limits. The module handles frames up to 2048 bytes for compatible traffic forwarding.

Passive thermal design silent operation

The unit operates without active cooling so it produces no fan noise in normal use. Power draw remains low because the converter only processes 10/100 Mbps Ethernet traffic. Heat dissipates through the metal enclosure during continuous operation. This makes the module suitable for quiet office or industrial environments where silent hardware is required.

Standalone module fits DIN rail or shelf mounts

The converter ships as a compact module that sits on a shelf or clips to a DIN rail using optional brackets. It needs a 5 V DC supply from an external adapter that is not included. One RJ-45 port and one SC duplex port free up copper switch ports for longer fibre runs. Installers must provide single-mode patch cords and a compatible power source to complete the link.

Highlights

  • Converts copper to fibre for 20 km reach
  • RJ-45 port handles 10/100 Mbps over 100 m
  • Single-mode SC interface runs at 1310 nm wavelength
  • Maximum frame size of 2048 bytes supported
  • Link distance reaches 12.4 miles on single-mode fibre

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

How is the Perle C-110-S2SC20 installed and which connection step is often missed?

Connect the RJ-45 port to twisted-pair copper up to 100 m or 328 ft, then link the SC single-mode fibre to the 1310 nm 100Base-LX port for up to 20 km or 12.4 miles; the step often missed is matching the TX fibre to the remote RX port and vice versa.

What maintenance or replacement will the Perle C-110-S2SC20 need later?

The unit has no moving parts or user-serviceable modules; only the external SC fibre patch cords may need replacement if connectors are damaged or contaminated, and the RJ-45 copper patch lead can be swapped if the clip breaks.

What limit appears first on the Perle C-110-S2SC20 under sustained load?

The maximum frame size of 2048 bytes caps the largest Ethernet frame the converter can forward, so jumbo frames exceeding that size will be dropped during continuous high-throughput traffic.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.