Peerless Industrial Group
Peerless Industrial Group K-13 1/2 G100 KUPLINK 598350013 conveying
Grade 100 Kuplink connecting link for 1/2 inch chain lifting applications
- Grade 100 strength for heavy lifting
- K-13 1/2 G100 KUPLINK model 598350013
- New Peerless Industrial Group hardware
- First listed by manufacturer February 15, 2022
- Automotive lifting, pulling and conveying component
K-13 1/2 G100 KUPLINK chain link
This Peerless Industrial Group component is a grade 100 Kuplink connector designed for lifting, pulling and conveying assemblies. It suits rigging professionals who need a single replacement link to complete or repair a chain sling. The part carries manufacturer number 598350013 and was first listed in 2022.
Sustained load behaviour
Grade 100 alloy steel provides the high working-load limit required for repeated overhead lifts. The link maintains its rated capacity through continuous duty cycles without the deformation seen in lower-grade carbon steel connectors. Proper inspection intervals remain essential for safety compliance.
Installation notes
The half-link profile connects directly to matching chain sizes using standard coupling tools. Misalignment during pin insertion is the most common error and can prevent the locking mechanism from engaging fully. Always verify the link orientation and pin seating before applying any load.
Highlights
- Grade 100 strength for heavy lifting
- K-13 1/2 G100 KUPLINK model 598350013
- New Peerless Industrial Group hardware
- First listed by manufacturer February 15, 2022
- Automotive lifting, pulling and conveying component
Specifications
| Brand | PEERLESS CHAIN |
|---|
Questions about this item
Does the K-13 1/2 G100 KUPLINK generate any noise or heat when it is used continuously on a job site?
The KUPLINK is a mechanical chain connector with no motor, fan or electronics, so it produces no audible noise and no heat during all-day lifting or conveying work.
What chain size and grade must I already have for the K-13 1/2 G100 KUPLINK to connect properly?
The coupler is marked 1/2 and G100, meaning it is made for 1/2-inch Grade 100 alloy chain; matching chain of that exact size and grade is required for a secure link.
Can the K-13 1/2 G100 KUPLINK be used alongside Grade 100 chain and fittings I purchased before 2022?
Yes — the coupler meets the Grade 100 specification, so it will mate with existing Grade 100 chain and components regardless of when they were bought.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
