Peerless
Peerless Chain 7011032 Double Loop Chain 100 ft 200 lb
Carbon steel double-loop chain supplied in a 100 ft coil with a 200 lb working load limit
- TypeTraffic & Parking Lot
- 100 ft of chain covers long runs
- 200 lb working load handles heavy tasks
- Carbon steel construction resists wear
- Zinc plated finish protects against corrosion
- Weldless double-loop links simplify attachment
Purpose & Audience
Peerless Chain 7011032 is a 100 ft double-loop chain made from carbon steel with a zinc-plated finish. It carries a working load limit of 200 lb and is classified for traffic and parking-lot use. The weldless links measure 2 1/8 in inside length by 3/8 in inside width, with five links per foot. No hook is included in the package.
Who It Suits & Who It Doesn't
This chain suits anyone needing a general-purpose barrier or tie-down for light-duty outdoor tasks such as crowd control or lot marking. It is not rated for lifting, so buyers who require overhead rigging or hoisting hardware should look at lifting-rated assemblies instead. The 200 lb limit also rules it out for heavy vehicle recovery or structural loads.
Installation & Common Issues
The chain feeds easily through posts or brackets and can be cut to length with standard bolt cutters. Because it is supplied in a single 100 ft coil without end fittings, users must add their own connectors or hooks. The zinc plating resists corrosion, but the carbon-steel core will rust if the coating is scratched, so inspect links before permanent outdoor installation.
Highlights
- 100 ft of chain covers long runs
- 200 lb working load handles heavy tasks
- Carbon steel construction resists wear
- Zinc plated finish protects against corrosion
- Weldless double-loop links simplify attachment
Specifications
| Brand | PEERLESS |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
What hardware is needed to attach the 1/0 trade-size links to a gate or post?
The zinc-plated carbon-steel links have a 3/8 in inside width and 2 1/8 in inside length, so shackles, quick links or S-hooks sized for 1/8 in material thickness will fit through the loops.
Can the 200 lb working-load chain run over existing pulleys or sheaves on a clothesline or light hoist?
Each link is weldless and 2 1/8 in long, giving a smooth profile that rides on standard sheaves sized for 1/0 trade chain without snagging.
How can I confirm the 100 ft coil meets the 200 lb working-load limit after unrolling it?
Count the links — there should be five links per foot — and verify the zinc-plated carbon steel shows no deformation; NACM compliance is marked on the product tag.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
