Peerless
Peerless 6020232 Machine Twist Chain 100 ft 310 lb
Carbon-steel twist chain, 100 ft long with a 310 lb working load limit and 21 links per foot
- Working load limit 310 lb for secure light-duty tasks
- 100 ft continuous length covers extended runs
- Carbon steel construction resists wear and deformation
- Zinc plated finish protects against corrosion
- 21 links per foot provide consistent flexibility
100 ft Twist Chain for Utility Work
This Peerless machine twist chain measures 100 ft overall and is made from carbon steel with a zinc-plated finish. Each welded link has an inside length of 5/8 in and an inside width of 1/4 in. The chain weighs .2 lb per foot and contains 21 links per foot.
Suits binding and non-lifting tension tasks
It is intended for pulling, conveying and general utility tension where a 310 lb working load limit is adequate. Because the specifications state it is not for lifting, anyone needing overhead hoisting or rigging should select a different chain rated for that purpose.
Steady load behaviour within rated limit
Under sustained tension up to the 310 lb working load limit the welded carbon steel links resist permanent elongation. The twist link geometry distributes stress evenly along the 100 ft length during continuous pulling or conveying duty.
Highlights
- Working load limit 310 lb for secure light-duty tasks
- 100 ft continuous length covers extended runs
- Carbon steel construction resists wear and deformation
- Zinc plated finish protects against corrosion
- 21 links per foot provide consistent flexibility
Specifications
| Brand | PEERLESS |
|---|
Questions about this item
What length of chain is needed to reach a 100 ft run?
The coil provides 100 ft of welded twist chain, so one unit covers the full distance.
Will the 310 lb working load limit hold when paired with older zinc-plated hardware?
The chain is zinc plated and rated at 310 lb; match it with fittings of equal or higher capacity to maintain the limit.
How can I confirm the 310 lb rating is met after installation?
Check for the NACM marking on the welded links and verify the 9/64 in material thickness on a sample link.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
