Peerless
Peerless 5510810 Alloy Steel Straight Chain 10 ft 22,600 lb Grade 100
Alloy steel Grade 100 straight chain, 10 ft long with a 22,600 lb working load limit
- Grade 100 alloy steel delivers 22,600 lb working load limit
- 10 ft welded straight chain with 2 in inside link length
- Black Thermadep finish protects alloy steel from corrosion
- 79 lb per foot weight for manageable handling
- 5/8 in trade size fits compatible 5/8 in fittings
Peerless Grade 100 Alloy Steel Chain
The Peerless 5510810 is a welded straight-link chain manufactured from alloy steel with a black Thermadep finish. It measures ten feet in overall length and carries a Grade 100 rating for overhead lifting applications. The working load limit is 22,600 pounds and the chain weighs 3.79 pounds per foot.
Suited for rated overhead lifts.
This chain suits riggers and maintenance teams who require a certified Grade 100 alloy steel sling component with a 22,600-pound working load limit. The 5/8-inch trade size and six links per foot match standard master links and hooks designed for this grade. Buyers who need a different working load limit, a shorter or longer cut length, or a chain grade other than Grade 100 should select an alternative product.
22,600-pound working load limit at Grade 100
The decisive specification is the 22,600-pound working load limit backed by the Grade 100 alloy steel rating. This figure determines whether the chain meets the design factor required for a specific lifting plan. Verify that the working load limit equals or exceeds the maximum intended load before putting the chain into service.
Highlights
- Grade 100 alloy steel delivers 22,600 lb working load limit
- 10 ft welded straight chain with 2 in inside link length
- Black Thermadep finish protects alloy steel from corrosion
- 79 lb per foot weight for manageable handling
- 5/8 in trade size fits compatible 5/8 in fittings
Specifications
| Brand | PEERLESS CHAIN |
|---|
Questions about this item
What trade size and link dimensions does the 5510810 chain have for fitting compatibility?
The chain uses a 5/8 in trade size with 2 in inside link length, 7/8 in inside width, and 41/64 in material thickness for compatible 5/8 in fittings.
How is the Grade 100 alloy steel chain installed for lifting, and what step is often missed?
Attach rated 5/8 in fittings to the welded straight links; the step often missed is verifying the working load limit of 22,600 lb matches the actual lift before use.
When should the 10 ft black Thermadep chain be replaced based on wear or damage?
Replace the chain if any link shows elongation beyond 5 percent, nicks, gouges, heat discoloration, or if the black Thermadep finish wears off exposing corrosion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
