Peerless
Peerless 5411265 Proof Coil Chain 141 ft Grade 30 1/4 in 1,300 lb WLL
Galvanised carbon-steel proof coil chain, 141 ft long, Grade 30 with a 1,300 lb working load limit
- Grade 30 proof coil chain rated for 1,300 lb working load limit
- 141 ft continuous length with 10 links per foot for extended reach
- Galvanized carbon steel construction resists corrosion in outdoor use
- Welded straight links with 1/2 in inside width accept 1/4 in fittings
- 58 lb per foot weight keeps handling manageable on the job
1/4 in Grade 30 Proof Coil Chain
This Peerless proof coil chain is a straight-link carbon-steel chain supplied in a 141 ft length. It carries a working load limit of 1,300 lb and is finished with a galvanised coating for corrosion resistance. The chain is welded throughout and has a trade size of 1/4 in.
Not for overhead lifting applications
The manufacturer specifies that this chain is not rated for lifting, so it cannot replace certified lifting chain or slings in rigging work. It is suited to pulling, binding, towing and general utility tasks where a Grade 30 working load limit is acceptable. Users needing overhead lifting capacity must select a higher-grade alloy chain.
Sustained load behaviour
Under continuous tension the galvanised carbon-steel links maintain their 1,300 lb working load limit without the short-term elasticity that synthetic straps exhibit. Each foot weighs 0.58 lb and contains ten links with an inside length of 1 1/4 in and inside width of 1/2 in. The material thickness is 17/64 in, giving consistent performance over long pulls.
Highlights
- Grade 30 proof coil chain rated for 1,300 lb working load limit
- 141 ft continuous length with 10 links per foot for extended reach
- Galvanized carbon steel construction resists corrosion in outdoor use
- Welded straight links with 1/2 in inside width accept 1/4 in fittings
- 58 lb per foot weight keeps handling manageable on the job
Specifications
| Brand | PEERLESS CHAIN |
|---|
Questions about this item
What size fittings work with the 1/4 in trade size and 1/2 in inside width?
The chain is designed for fittings with 1/4 in compatible thickness matching the 1/2 in inside width.
How do you join or terminate this proof coil chain without a master link?
Cut the welded straight links to length and attach 1/4 in fittings; no master link is included.
When should the galvanized carbon steel chain be replaced?
Replace if links stretch beyond the 1 1/4 in inside length, show cracks, or lose the galvanized coating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
