Peerless
Peerless 4503290 Galvanized Wire Rope 3/16in 250ft
Galvanized steel wire rope with a 7×19 strand construction, 3/16 in diameter, 250 ft length, 840 lb working load limit and 4,200 lbf breaking strength
- TypeWheelbarrows & Carts
- 840 lb working load limit for secure lifting
- 4,200 lbf breaking strength adds safety margin
- 7 x 19 strand construction stays flexible under load
- 3/16 in galvanised steel resists outdoor corrosion
- 250 ft continuous length covers long runs
Galvanized Wire Rope 3/16in 250ft
This Peerless galvanized steel wire rope measures 3/16 inch in diameter and spans 250 feet. It uses a 7 x 19 strand construction with a wire strand core for flexibility. The rope carries a working load limit of 840 lb and a breaking strength of 4,200 lbf. It is supplied plain and unlubricated with a silver finish.
Suits general rigging.
Buyers who need a rope rated for overhead lifting with certified test documentation should look elsewhere. This product is not intended for applications requiring a specified minimum bend radius or pre-lubricated corrosion protection. Users needing a different diameter, length or stainless steel construction will need another specification.
Working load limit 840 lb decides suitability
The 840 lb working load limit is the single figure that determines whether this rope matches the load requirements of the job. Always compare the actual applied load, including dynamic factors, against this limit before specifying the rope. The 7 x 19 construction supports repeated bending over sheaves or drums where a stiffer rope would fail.
Highlights
- 840 lb working load limit for secure lifting
- 4,200 lbf breaking strength adds safety margin
- 7 x 19 strand construction stays flexible under load
- 3/16 in galvanised steel resists outdoor corrosion
- 250 ft continuous length covers long runs
Specifications
| Brand | PEERLESS |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
Does the 7 x 19 galvanized steel rope generate noticeable heat or vibration during continuous winching?
The wire strand core and unlubricated galvanized steel construction produce no measurable heat or vibration under normal winching loads.
What hardware must I already have to use the 3/16 in plain-end rope safely?
You need a drum or sheave sized for 3/16 in cable, compatible clips or thimbles for termination, and a winch or hoist rated for at least the 840 lb working load limit.
Will the 4 200 lbf breaking strength rope work with older 3/16 in pulleys and fairleads I already own?
Yes — the 3/16 in overall diameter and 7 x 19 strand construction match standard 3/16 in pulley grooves and fairlead openings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
