Peach Country
Peach Country Polymeric Paver Sand Beige 20 lb accessory
Beige polymeric paver sand for joints up to two inches, haze-free with one watering and rain-safe in 15 minutes for drainage applications
- TypePaver Sand
- ColorBeige
- Rain-safe in 15 minutes after watering for drainage joints
- Dust-free and haze-free application with no blower required
- Single watering activation simplifies installation process
- Resists erosion from wind, rain and freeze-thaw cycles
- Works in temperatures above 32°F for year-round use
Polymeric Sand for Paver Joints
Rhino Power Bond Plus is a beige polymeric sand designed for residential and commercial paver installations. It suits concrete pavers, natural stone, wet-cast products and clay pavers. The product fills joints in drainage and overlay applications. Homeowners and contractors use it for patios, driveways, pool decks and footpaths.
Weather Activation and Rain Safety
The sand activates with a single watering and works at temperatures above 32 degrees Fahrenheit. In drainage applications it becomes rain safe after 15 minutes. Overlay applications require 24 hours before rain exposure. The formulation produces no dust or haze, removing the need for a blower during installation.
Storage and Erosion Protection
Waterproof bags allow intact pallets or individual bags to be stored flat outdoors. The cured joints resist erosion from wind, rain and freeze-thaw cycles. The 20 lb bag covers joints up to a maximum of 2 inches in overlay use and 4 inches in drainage use. It is also compatible with Gator Base and false joint paver systems.
Highlights
- Rain-safe in 15 minutes after watering for drainage joints
- Dust-free and haze-free application with no blower required
- Single watering activation simplifies installation process
- Resists erosion from wind, rain and freeze-thaw cycles
- Works in temperatures above 32°F for year-round use
Specifications
| Type | Paver Sand |
|---|---|
| Color | Beige |
Questions about this item
How do I install the 20 lb bag of beige polymeric sand and what step is most often missed?
Sweep the sand into joints up to 2 inches, then water once; the step often missed is waiting the full 24 hours before rain exposure on non-drainage overlays.
What maintenance will the beige polymeric sand need after it sets in the joints?
The sand helps prevent erosion from wind, rain and freeze/thaw cycles, so no routine reapplication is required unless joints are physically damaged.
What is the first limit that appears when the installed sand faces continuous weather?
Rain safety is reached in 15 minutes for drainage joints but takes 24 hours for overlay joints, so the overlay cure time is the limiting factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
